Walksnail Avatar HD PRO Kit (Dual Antenna Version)

• Ultra-Clear 1080P/60FPS with Night Vision: Powered by a 1/1.8-inch Starvis II sensor and advanced H.265 encoding, this Air Unit Pro for FPV Drone delivers ultra-sharp 1080P/60FPS video with a wide 160° FOV and average 22ms latency. Enjoy excellent night vision performance even in challenging low-light scenarios.
• Stable Long-Range Digital Transmission: Features dual antennas and enhanced TVS protection. Supports 6S input (6–25.2V), providing a stable digital video feed with strong signal penetration up to 4KM range, even in complex environments.
• Built-in Gyroflow and 32GB Storage: Integrated gyro for Gyroflow stabilization support ensures smooth, shake-free video. The built-in 32GB memory card records extended HD footage without relying on external storage or Wi-Fi connection.
• Compact and Lightweight with Smart Layout: Weighing only 30g, the streamlined design reduces the load on your drone. Supports both 20×20mm and 25.5×25.5mm mounting patterns. Features an improved PCB layout, optimized antenna placement, and repositioned bind button for easier installation and enhanced durabilit.
• Smooth Compatibility with Goggles X & L: Fully compatible with Walksnail Avatar HD Goggles X and L, delivering immersive visuals and seamless integration for a streamlined FPV experience.

Walksnail Avatar HD Pro kit (Dual Antennas Version)

features：

• Dual Antennas
• Compatible 4K
• FOV160°
• 6V-25.2V
• 4km range
• 22ms low latency
• Built-in 32G storage
• High frame starlight
• 1080P 120fps compatibility
• Sony Starvis Ⅱ Technology

Bullet Points for Avatar HD Pro kit (Dual Antennas)

• The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/100FPS.
• Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that’s just as clear as day.

• The camera supports Gyroflow, take you smooth and stable video quality.

• The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
• Updated the design of PCB board and shell, improved the quality of VTX, more durable.
• Optimized the installation place of the antenna, so as to better protect the VTX.
• The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
• A spare pad is added to provide two power connection modes.

• New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

• The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference.

• It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.

• Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

Specification
Camera
Model	Avatar HD Pro Camera
Image Sensor	1/1.8-Inch Sony Starvis Ⅱ Sensor
Resolution	1080P/60fps;720P/100fps,720P/60fps compatibility;
Ratio	16/9; 4/3
Lens	8Mp
FOV	160°
Aperture	F1.6
Shutter	Rolling shutter
Min.Illumination	0.00001Lux
Weight	9.5g
Dimensions	19*19*24mm
Coaxial Cable	140mm
VTX
Model	Avatar V2 Pro Module(Dual Antenna)
Communication Frequency	5.725-5.850GHz
Transmitter Power (EIRP)	FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
1/O Interface	JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes	25.5*25.5mm; 20*20mm
Dimensions	33.5*33.5*10.5mm
Storage	32G
Recording	1080p/720p
Weight	15.4g
Operating Temperature	-20-40℃
Channels	8
Wide Power Input	6V-25.2V
Supported FC System	Betaflight; Inav; Fettec; ArduPilot;Kiss
OSD	Canvas mode
Latency	Average delay 22ms
Antenna	2(IPEX)
Avatar V2 Antenna
Polarization	LHCP
Frequency range	5600MHz-6000MHz
Gain	1.9dBi
VSWR	≤1.5
Input Impedance	50Ω
Interface	IPEX-1
Size	R15 X 45mm(without cable)
Weight	2g