# Vega Drones Private Limited > Building Indian Drone Ecosystem ## Posts - [Drone Battery – Reliable Power Source for Advanced Drone Performance](https://vegadrones.in/2025/12/22/drone-battery-reliable-power-source-for-advanced-drone-performance/): A reliable power source is a must-have for any drone, and this is where the drone battery comes in. The drone battery is the main power source of power for your drone and provides it with sufficient energy to operate the drone’s motors, sensors and all of its onboard systems. No matter if you own a drone for fun, aerial photography or commercial use like inspection, agriculture and defence, the performance of your drone is mainly decided by its battery. At Vega Drones, we focus on creating and supplying high-end drone batteries aimed at the new era of drone technology. [...] - [Drone Receiver Explained: The Heart of Your Drone’s Control System](https://vegadrones.in/2025/12/22/drone-receiver-explained-the-heart-of-your-drones-control-system/): A drone must communicate effectively between its transmitter (controller) and receiver to function. The drone receiver is a very important component in the system as it gets every order from the transmitter and sends it instantaneously. Whether it’s for hobby flying, aerial imagery, use in an industrial environment or even a defence application, the receiver must be reliable and ensure accuracy, stability and safe operation. We at Vega Drones have developed high-performance drone receivers made to work with today’s advanced drone technology. Reliability, compatibility and efficiency are our underlying design principles to make sure everything is in control with ease, [...] - [Drone Battery: Powering Safe, Long, and Eco-Friendly Flights](https://vegadrones.in/2025/09/11/drone-battery/): Drones are becoming part of our daily lives, from capturing beautiful photos to supporting eco-friendly farming and environmental projects. At the heart of every drone lies the drone battery, the small but powerful component that decides how high, far, and safe your flights can go. Understanding your drone battery is important because it helps you fly responsibly, extend battery life, and reduce electronic waste. Why the Drone Battery Matters A drone battery is like the heartbeat of your flying machine, keeping it in the sky with stable power. Without a healthy battery, drones cannot fly smoothly, stay balanced, or handle [...] - [Drone Controller Remote: Guiding Your Flights with Precision and Care](https://vegadrones.in/2025/09/11/drone-controller-remote-2/): Every smooth flight begins with the drone controller remote, the essential tool that connects you to your flying machine. This handheld device enables you to guide your drone, maintain its balance, and perform impressive tasks with ease through simple movements. A reliable controller makes drone flying safer, easier, and more enjoyable for both beginners and experienced pilots. Why the Drone Controller Remote is Important The drone controller remote is like the steering wheel of your car—it gives you control, safety, and direction in flight. Without a good controller, flying a drone becomes harder, less accurate, and even unsafe. A proper [...] - [Drone Controller Remote: A Simple Guide for Beginners](https://vegadrones.in/2025/08/19/drone-controller-remote/): The drone controller remote is your direct link to the skies, giving you precise command over every flight. The drone controller remote is the main part of the device that allows and supplies connection to the drone to fly your drone with ease and accuracy. It connected to you directly to your drone, helping you manage its speed, height, and direction safely. Understanding how this device works is important if you love drones or plan to learn to fly them. In this blog, you will learn about the drone controller remote, and a clear and easy guide can make learning [...] - [What is a Flight Controller? A Simple Guide for Drone Lovers](https://vegadrones.in/2025/08/19/flight-controller/): The flight controller is the brain of your drone, turning raw power into smooth, smart, and stable flight. Drones have become more than flying gadgets—they help farmers, filmmakers, and even scientists or travel vloggers. At the heart of every drone is the Flight Controller, the brain that keeps it flying smoothly. Without these little powerhouse parts, your drone would not be able to know how or where to fly. Let’s explore in this blog how the Flight Controller works, why it’s essential, and how you can choose the right one. Understanding the Flight Controller The Flight Controller is a power [...] - [Start Your Flying Journey with a Drone Kit](https://vegadrones.in/2025/08/18/drone-kit/): Drones are cool flying machines that many people enjoy in today’s generation. Whether you’re a student, a hobbyist, or just someone who wants to try something new, a drone kit is the perfect way to begin. It gives you the chance to build your drone from the ground up. Different from purchasing a pre-made drone, a drone kit allows you to understand and learn how things work. It is not only entertaining and informative, but it is also eco-friendly if you choose the right components. Drone construction is a hobby that many people of all ages will enjoy since it [...] - [Understanding the Drone Motor: The Heart of Every Eco-Friendly Drone](https://vegadrones.in/2025/08/18/drone-motor/): Choosing the right drone motor is the key to unlocking power, speed, and flight performance. A drone motor is the most important part of any drone. It provides the necessary power for the propellers to operate, readying the drone to lift off. Without motors, drones would merely be scraps of plastic and wires. The reason a drone can reach great altitudes and speeds is the motor it has integrated within. Your experience in the hobby or field will affect your decision on whether to build or buy a drone.  One of the most critical steps on the journey of new [...] - [Top 5 Emerging Trends in Drone Technology for 2025](https://vegadrones.in/2025/06/05/top-5-emerging-trends-in-drone-technology-for-2025/): The drone technology landscape has changed significantly over the last decade. From toys to being used as the most important tools in an industry, the future holds much for the way people live and work in 2025. The transformative era of drones will be achieved with key breakthroughs in autonomy, artificial intelligence, energy efficiency, communication, and sustainability. Below are the top five emerging technologies shaping the drone industry in 2025. 1. Autonomy and AI Integration Autonomy and AI lead innovation, and drones will perform complex tasks with fewer humans. In 2025, by using drones, one would be able to: 2. [...] - [How AI and Machine Learning Are Transforming Drone Capabilities](https://vegadrones.in/2025/06/05/how-ai-and-machine-learning-are-transforming-drone-capabilities/): The integration of Artificial Intelligence (AI) and Machine Learning (ML) into drone technology is revolutionizing the capabilities of unmanned aerial vehicles (UAVs). This shift can be traced across various sectors, including agriculture, logistics, emergency services, and military applications. AI significantly boosts drones’ functionality and effectiveness by enhancing autonomy, improving decision-making, and enabling real-time data processing. Drones were initially remote-controlled devices with limited autonomy means they used to rely heavily on human control. However, in the wake of AI, this has changed, turning drones into intelligent systems that can execute complex tasks on their own. Industry reports suggest that the global [...] ## Pages - [Defence Segment](https://vegadrones.in/defense-drones/) - [Consumer Segment](https://vegadrones.in/consumer-drone-segment/) - [Agriculture Segment](https://vegadrones.in/best-agriculture-drone/) - [Partnership](https://vegadrones.in/brand-partners/) - [Custom Drone](https://vegadrones.in/customize-your-drone/) - [Contact Us](https://vegadrones.in/contact-us/) - [Shipping Policy](https://vegadrones.in/shipping-policy/) - [Privacy Policy](https://vegadrones.in/privacy-policy-2/) - [Return & Refund](https://vegadrones.in/return-refund/) - [Terms & Conditions](https://vegadrones.in/364-2/) - [Wishlist](https://vegadrones.in/wishlist/) - [My account](https://vegadrones.in/my-account/) - [Checkout](https://vegadrones.in/checkout/) - [Cart](https://vegadrones.in/cart/) - [Shop](https://vegadrones.in/shop/) - [test](https://vegadrones.in/test/): test - [Left Sidebar](https://vegadrones.in/elements/pages/left-sidebar/) - [Flip Book](https://vegadrones.in/elements/flip-book/) - [Slider Cover](https://vegadrones.in/shop-demos/slider-cover/) - [Maintenance](https://vegadrones.in/elements/pages/maintenance/) - [Video Cover](https://vegadrones.in/shop-demos/video-cover/) - [Our Stores](https://vegadrones.in/elements/pages/our-stores/) - [Grid Style 3](https://vegadrones.in/shop-demos/grid-style-3/) - [Freelancer](https://vegadrones.in/business-demos/freelancer/) - [Big Sale](https://vegadrones.in/shop-demos/big-sale/) - [Video](https://vegadrones.in/elements/video/): Add Responsive video embed to your site by using the Page Builder. YOUTUBE VIMEO - [Video Button](https://vegadrones.in/elements/video-button/) - [Galleries](https://vegadrones.in/elements/galleries/) - [Hotspot](https://vegadrones.in/elements/hotspot/) - [Vendor Shop](https://vegadrones.in/shop-demos/vendor-shop/) - [Sale Countdown](https://vegadrones.in/shop-demos/sale-countdown/) - [Explore](https://vegadrones.in/business-demos/explore/) - [Forms](https://vegadrones.in/elements/forms/) - [Price table](https://vegadrones.in/elements/price-table/) - [Search box](https://vegadrones.in/elements/search-box/) - [Instagram feed](https://vegadrones.in/elements/instagram-feed/) - [Accordion](https://vegadrones.in/elements/accordion/) - [Logo](https://vegadrones.in/elements/logo/) - [Portfolio](https://vegadrones.in/elements/pages/portfolio/) - [Pages](https://vegadrones.in/elements/pages/) - [Scroll To](https://vegadrones.in/elements/scroll-to/) - [Countdown](https://vegadrones.in/elements/countdown/) - [Corporate](https://vegadrones.in/business-demos/simple-corporate/) - [Sport Shop](https://vegadrones.in/shop-demos/sport-shop/) - [Cute Shop](https://vegadrones.in/shop-demos/cute-shop/) - [Images](https://vegadrones.in/elements/images/) - [Rows / Columns](https://vegadrones.in/elements/rows-columns/) - [Typography](https://vegadrones.in/elements/typography/) - [Banners](https://vegadrones.in/elements/banner/) - [Image Box](https://vegadrones.in/elements/image-box/) - [Parallax Shop](https://vegadrones.in/shop-demos/parallax-shop/) - [Size Chart](https://vegadrones.in/elements/pages/size-chart/) - [Mega Shop](https://vegadrones.in/shop-demos/mega-shop/) - [Booking](https://vegadrones.in/business-demos/booking/): Coming soon… - [Lifestyle](https://vegadrones.in/business-demos/lifestyle/): Coming soon… - [Agency](https://vegadrones.in/business-demos/agency/) - [Business Demos](https://vegadrones.in/business-demos/): Business demos - [Shop Demos](https://vegadrones.in/shop-demos/) - [Sections](https://vegadrones.in/elements/sections/) - [Banner Grids](https://vegadrones.in/elements/banner-grid/) - [Grid Style 1](https://vegadrones.in/shop-demos/grid-style-1/) - [Lightbox](https://vegadrones.in/elements/lightbox/) - [Fullscreen Fashion](https://vegadrones.in/shop-demos/fullscreen-fashion/) - [Track your order](https://vegadrones.in/track-order/) - [Message box](https://vegadrones.in/elements/message-box/) - [Product Categories](https://vegadrones.in/elements/shop-now/) - [Products](https://vegadrones.in/elements/products/) - [Share / follow icons](https://vegadrones.in/elements/sharefollow-icons/) - [Team Member](https://vegadrones.in/elements/team-member/) - [Icon Box](https://vegadrones.in/elements/icon-box/) - [Titles / Dividers](https://vegadrones.in/elements/titles-dividers/) - [Grid Style 2](https://vegadrones.in/shop-demos/grid-style-2/) - [FAQ](https://vegadrones.in/elements/pages/faq/): Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet. Duis sagittis ipsum. Praesent mauris. Fusce nec tellus sed augue semper porta. Mauris massa. Vestibulum lacinia arcu eget nulla. - [Testimonials](https://vegadrones.in/elements/testemonials/) - [Buttons](https://vegadrones.in/elements/buttons/) - [Contact](https://vegadrones.in/elements/pages/contact/):   - [Blog](https://vegadrones.in/drones-blogs/): Take a look here on how to setup your blog page: http://docs.uxthemes.com/article/243-how-to-setup-your-blog-page - [About](https://vegadrones.in/elements/pages/about-vega-drones/) - [Map](https://vegadrones.in/elements/map/) - [Simple Slider](https://vegadrones.in/shop-demos/simple-slider/) - [Sliders](https://vegadrones.in/elements/sliders/) - [Blog Posts](https://vegadrones.in/elements/blog-posts/) - [Tabs](https://vegadrones.in/elements/tabs/) - [Elements](https://vegadrones.in/elements/) - [best professional drone](https://vegadrones.in/) ## Products - [IMAX B6AC Charger/Discharger 1-6 Cells](https://vegadrones.in/product/imax-b6ac-charger-discharger-1-6-cells/): The new SkyC IMAX B6 AC V2 Professional Balance Charger / Discharger is a versatile device that can handle different types of batteries used in Robotics. It eliminates the need for multiple chargers and messy workstations. It is an improved version of the previous IMAX B6AC model, with some unique features. The charger can charge and discharge various batteries, such as lipo, lion, etc., and monitor the voltage of each cell. It does not require an external balancer or discharger. It can also be connected to a PC or a smartphone via WiFi module (both iOS and Android) to control [...] - [Radiomaster RP1 V2 ExpressLRS Nano Receiver](https://vegadrones.in/product/radiomaster-rp1-v2-expresslrs-nano-receiver/): The RP1 ExpressLRS 2.4GHz Nano Receiver is designed to offer precise and reliable control for a wide range of remote-controlled models. Its small form factor and lightweight design make it suitable for integration into various RC models without adding significant weight or bulk. This is a Radiomaster RP1 ExpressLRS Nano Receiver. The RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chips. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has [...] - [RadioMaster RP3 V2 ExpressLRS 2.4ghz Nano Receiver](https://vegadrones.in/product/2575/): The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the RP series of nano receivers deliver features and range today’s pilots have come to expect. Developed around the ESP8285 MCU and SX1280IMLTRT RF Chip the RP series offer Lora and FLRC 2.4ghz RF links offering incredible range and low latency. With Wifi built-in FW updates can be done on your craft without the need to remove the receiver. Binding can be done using a bind phrase meaning no more bind plugs or fiddly button presses while trying [...] - [Radiomaster Pocket Radio Controller ELRS Version (Transparent)](https://vegadrones.in/product/radiomaster-pocket-radio-controller-elrs-version-transparent/): Model: Radiomaster Pocket Radio controller – ELRS RadioMaster Pocket is a small. Compatible with 18650 batteries. Preinstalled with EdgeTX firmware. removable stick ends and foldable antenna. This is Radiomaster Pocket Radio Controller – ELRS Version (Transparent). The RadioMaster Pocket is a small, lightweight radio that packs a big punch. It is available in two versions, ExpressLRS  come preinstalled with EdgeTX firmware. The version of this radio controller is ELRS. The Pocket is also equipped with removable stick ends and a foldable antenna, making it easy to transport and store. It is compatible with 18650 batteries, which provide long battery life [...] - [1270 Cinelifter Glass Fiber Nylon 3 Blade CW/CCW](https://vegadrones.in/product/1270-cinelifter-glass-fiber-nylon-3-blade-cw-ccw/): Characteristic 1270-3 is made by Glass Fiber Nylon. It has deformation resistancewith high-lift to drag ratio. And it will always have good consumption function while flying. Specification Inch: 12in Pitch: 7in Weight: 33.4g Mount: 6mm with adapor ring Colors: Black Recommend Motor: 4218-540kv PropDisk Diameter: 304.8mm Center Thickess: 10.8mm Max Prop Width: 26.4mm Materials: Glass Fiber Nylon Weight 0.065 g Dimensions 28 × 28 × 1 cm Brand Gemfan - [1170 Cinelifter Glass Fiber Nylon3 Blade CW/CCW-Black](https://vegadrones.in/product/1170-cinelifter-glass-fiber-nylon3-blade-cw-ccw-black/): Gemfan Cinelifter 1170 3-Blade Glass Fiber Nylon Propeller (1CW+1CCW) Gemfan 1170 propellers for the Cinelifter. These propellers are the result of the partnership with Ellis Van Jason and Josh Enriques.. The 1170 demonstrates durability and the best performance. FEATURES: 11in narrow and large-pitch propellers optimized overall design strength and more explosion-resistant combined with brushless motors above 32 series to provide a maximum pulling force of more than 5kg to achieve flexible flight of high-load UAVs  SPECIFICATIONS: Size: 11 inches Pitch: 7in Weight: 27.7 g Center Hole Dia: 1.5mm Recommended motor: 3220 Props Dia: 279.4mm Center Thickness: 9mm Maximum paddle width: 24mm Material: glass fiber nylon [...] - [Carbon Nylon MR 1045-Grey](https://vegadrones.in/product/carbon-nylon-mr-1045-grey/): Material Plastic Usage/Application Propeller Weight 0.6 kg Brand Gemfan Color Grey Dimensions 20 x 16 x 7 cm Availability In Stock Gemfan MR 1045 Carbon Nylon Weight 0.6 kg Dimensions 20 × 16 × 7 cm - [Glass Fiber Nylon MR 1045-Grey](https://vegadrones.in/product/glass-fiber-nylon-mr-1045-grey/) - [D90 Ducted PC Blade 5 1.5mmM5-Clear Gray](https://vegadrones.in/product/d90-ducted-pc-blade-5-1-5mmm5-clear-gray/): Gemfan D90 Ducted PC 5 Blade 2mm & M5 Propellers are robust and lightweight blades designed specifically for drones. Available in various sizes and vibrant colors, these propellers enhance a flight performance and add a stylish touch. Pro-Range D90 Ducted PC 5 Blade 2mm&M5 Propellers improve flight stability and efficiency, ensuring smooth operation during drone use. The Gemfan D90 Ducted PC 5 Blade 2mm & M5 Propellers are crafted from durable materials like Polycarbonate, Glass Fiber Nylon, Polycarbonate Reinforced etc, offering an ideal balance of strength and weight. With a well-designed pitch, they optimize thrust efficiency, making them perfectly suitable [...] - [1510 Glass Fiber Nylon 3 Blade CW/CCW-Black](https://vegadrones.in/product/1510-glass-fiber-nylon-3-blade-cw-ccw-black/): Technical Specification Brand: Gemfan Colour: Black Pitch: 10in Prop Diameter: 381mm Center Thickness: 13mm Center Hole Inner Diameter: 6mm,With 6 Holes Adapter Max Prop Width: 34.3mm Weight: 70g Recommended Motor: 4218 660kv No. Of Blades: 3 Warranty Information All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page. Description 1510 Glass Fiber Nylon 3 Blade CW/CCW – Black Propeller (1 Pair) The 1510 Glass Fiber Nylon 3 Blade Propeller from Gemfan is a high-performance propeller set designed for professional-grade [...] - [KOKO-3115 900KV Motor](https://vegadrones.in/product/koko-3115-900kv-motor/): Brand: ReadytoSky KV Rating: 900KV Weight: 112g Shaft Diameter: 5.0mm Motor Diameter: 37.0mm LiPo Cells: 3-6S LiPo Frame: 12N14P Mounting Holes: M5 Power Your Drone with Precision: Elevate Your Flight Performance Today The 3115 900Kv 3-6S Brushless Motor by Readytosky is engineered for drone enthusiasts seeking high efficiency and reliability at an affordable price. Designed specifically for 9-10″ drones in combination with a 6S battery, this motor provides superior power with advanced features such as rounded magnets and single wire windings, ensuring smooth and consistent performance. Its sturdy construction with a bell secured by a screw ensures durability for extended [...] - [Triple Feed Patch 5.8GHz Antenna RP SMA](https://vegadrones.in/product/triple-feed-patch-5-8ghz-antenna-rp-sma/): Product:  Triple Feed Patch 5.8GHz Antenna RP SMA Center frequency: 5.8 GHz Antenna gain: 9.4 dBi Bandwidth: 660 MHz (5.47 – 6.13 GHz) Axial ratio: < 1.3 The Triple Feed Patch antenna is a directional circularly polarized antenna. Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz. Good axial ratio, not just directly perpendicular to the patch but also off-center. Cheap and easy to manufacture with high accuracy, even for a hobbyist. Features: Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz. Good axial [...] - [Radiomaster Ranger Micro 2.4GHZ ELRS Module](https://vegadrones.in/product/2539/): Built-in ExpressLRS Backpack High-efficiency cooling system Wifi and Bluetooth support Packet rates up to F-1000Hz T-antenna included The Radiomaster Ranger Micro 2.4GHZ ELRS Module  represents the cutting edge in ELRS technology. Attach the module to a compatible radio (TX16S, TX16S MkII, TX12, TX12 MkII and more) to enjoy all that ELRS has to offer.The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications. Features: Built-in ExpressLRS Backpack High-efficiency cooling system Wifi and Bluetooth support Packet rates up to F-1000Hz T-antenna included With the Micro connector, support TX16S MKII and TX12 MKII [...] - [iFlight XING-E Pro 2207 2-6S 1800kv](https://vegadrones.in/product/iflight-xing-e-pro-2207-2-6s-1800kv/): XING-E Pro 2207 2-6S FPV Motor Unibell – 2450KV was specially designed for ultra-light or toothpick 5 inch rigs around 250g. XING technology inside for ultra smooth and powerful flight experience. Available in 2550KV (4S) or 1900KV (6S) which can be coupled with our new Nazgul 5030 props or any other 1.5mm shaft prop on the market. Features: High-Strength 5mm Steel Shaft: Durable and reliable for demanding applications. N52H High-Temperature Magnets: Offers superior magnetic strength and heat resistance. NSK Bearings: Ensures smooth operation and long-lasting performance. 16x16mm Hole Pattern: Standardized for compatibility with various mounts. Single Strand Copper Winding: Enhances efficiency and heat dissipation. Hex Bolt Shaft Set Screw: Provides secure fastening and easy maintenance. Package Includes: 1 x XING-E Pro 2207 motor - [Foxeer Reaper 65A ESC](https://vegadrones.in/product/foxeer-reaper-65a-esc/): Experience the ultimate performance upgrade with the Foxeer Reaper F4 128K 65A BL32 4in1 ESC. Designed for FPV racing enthusiasts, this ESC combines raw power, advanced features, and impeccable reliability. Equipped with the latest BLHeli_32 firmware, it guarantees smooth and efficient operation, pushing the boundaries of your quadcopter’s capabilities. The compact 4in1 design not only saves valuable space but also simplifies wiring, resulting in a cleaner and more organized build. With a wide input voltage range of 9~40V, this ESC can handle various battery configurations, giving you flexibility and compatibility. Built with high-quality components, the Foxeer Reaper ESC ensures long-lasting performance, allowing you to push your limits and dominate the racecourse. Upgrade your FPV racing experience today with the Foxeer Reaper F4 65A ESC. Shop now and unleash the full potential of your quadcopter. Features: Powerful Performance: The Foxeer Reaper F4 128K 65A ESC delivers exceptional power and responsiveness for your FPV racing quadcopter. Advanced BLHeli_32 Firmware: Benefit from the latest BLHeli_32 firmware for smooth and efficient operation. Compact 4in1 Design: The integrated 4in1 design saves space and reduces wiring complexity, resulting in a clean and organized build. Wide Input Voltage Range: With a wide input voltage range of 9~40V, this ESC is compatible with various battery configurations. Reliable Build Quality: Crafted with high-quality components, the Foxeer Reaper F4 65A ESC ensures durability and longevity for intense flying sessions. Package Includes: 1 x Foxeer Reaper F4 65A ESC Item Type: Electronic Speed Controller Firmware: BLHeli 32 Continuous Current (A): 65 Burst Current (A) 100A*4 Input Voltage (V): DC 9V~40V (3-8S Lipo) BEC (Y/N): NO Telemetry Supported ESC Programming BLHeli32 Input signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Operating Temperature (°C): -20℃ ~ +55℃ Operating humidity 20～95% Storage Temperature (°C): -20℃ ~ +70℃ Mounting Hole (mm) 30.5X30.5mm,Φ4mm/M3 Overall Dimension 42.5x42x5.5mm Weight (g): 14.8g Shipping Dimensions 7 × 7 × 4 cm - [Emax ECOII-2207-1900KV Brushless Motor](https://vegadrones.in/product/emax-ecoii-2207-1900kv-brushless-motor/): This is a Emax ECOII-2207-1900KV Brushless Motor. The engineers at Emax are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improved performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance of its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust are generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Features: Precision bearing Steel shaft Anodizing 19 x 19mm hole pattern Multi-strand winding. Package Include: 5 x M3 x 8mm Screw 5 x M3 x 7mm screw 5 x M3 x 6mm screw 1 x Aluminium M5 nylock nut 1 x Washer and screw for shaft Motor KV (RPM/V): 1900 Motor Type: Brushless Motor Compatible LiPO Batteries: 3S to 6S Framework 12N14P Length (mm): 33.1mm Diameter 27.5mm Maximum Thrust (gm) 2020g(on 6s) Compatible Prop (inch): 5″-5.5″ Weight (g): 33.6g (w/o silicone wire) Prop Adapter Shaft Thread M5 Shipping Weight 0.055 kg Shipping Dimensions 7 × 4 × 4 cm - [Nazgul 5030 Props](https://vegadrones.in/product/nazgul-5030-props/): The Nazgul T5030 is a tri-blade propeller, with a 3mm pitch, 1.5mm shaft, and suitable for the XING 2005 motor or related. About this product The Nazgul T5030 is a  tri-blade propeller, with a 3mm pitch, 1.5mm shaft, and suitable for the XING 2005 motor or related. Choose from three different colors (red, blue, gray). Note: These props have a unique 6×6 propeller mount spacing that works specifically with the iFlight XING2 1806 and iFlight XING 2005 motors. Specifications Item Name: 5030 5 Inch Durable 3-Blades Propeller Model: Nazgul Cine 5030 Blades: 3 blades Material: polycarbonate Mounting: 1.5mm center hole Propeller Diameter: 5 inch [...] - [XING 2806.5 Unibell 1300kv](https://vegadrones.in/product/xing-2806-5-unibell-1300kv/): XING-E Pro 2207 2-6S FPV Motor Unibell – 2450KV was specially designed for ultra-light or toothpick 5 inch rigs around 250g. XING technology inside for ultra smooth and powerful flight experience. Available in 2550KV (4S) or 1900KV (6S) which can be coupled with our new Nazgul 5030 props or any other 1.5mm shaft prop on the market. Features: High-Strength 5mm Steel Shaft: Durable and reliable for demanding applications. N52H High-Temperature Magnets: Offers superior magnetic strength and heat resistance. NSK Bearings: Ensures smooth operation and long-lasting performance. 16x16mm Hole Pattern: Standardized for compatibility with various mounts. Single Strand Copper Winding: Enhances efficiency and heat dissipation. Hex Bolt Shaft Set Screw: Provides secure fastening and easy maintenance. Package Includes: 1 x XING-E Pro 2207 motor Motor Type: FPV Motor Motor KV (RPM/V): 2450 Peak Current (A) 42.63A Watts 682.1W Mounting holes 16*16 φ3mm Shaft Length 13.5 mm Shaft Diameter (mm): 5mm Configuration: 12N14P Winding Type Single Strand copper winding Weight (g): 33.8g Overall Dimension φ28.5*19.7mm Shipping Weight 0.046 kg Shipping Dimensions 5 × 5 × 4 cm - [XING 2814 880 Race motor](https://vegadrones.in/product/xing-2814-880-race-motor/): Description XING 2205 FPV Motor (12/M2) – 3200KV motor was specially designed for ultra-light or toothpick 5 inch rigs around 250g. XING technology inside for ultra smooth and powerful flight experience. Available in 2550KV (4S) or 1900KV (6S) which can be coupled with our new Nazgul 5030 props or any other 1.5mm shaft prop on the market. Features: 3mm inner shaft, 1.5mm outer titanium alloy shaft Japanese NSK φ8*φ3*4 bearings N52H curved magnets Motor wires protected Dynamically balanced Package Includes: 1 x XING 2005 Motor 4 x M2*6 screws 4 x M2*7 screws - [T Motor Antigravity MN6007II KV320](https://vegadrones.in/product/t-motor-antigravity-mn6007ii-kv320/): About T-MOTOR MN6007 II Multirotor VTOL UAV Motor KV160/KV320 T-Motor Antigravity MN6007II KV160/KV320 is a cutting-edge brushless motor designed to elevate the performance of your UAV to new heights. With an ultra-lightweight build and precision engineering, this motor is perfect for demanding applications like aerial photography, surveying, mapping, and rescue operations. Combining high efficiency, enhanced thrust, and a unique cooling system, the MN6007II ensures stable, reliable, and long-lasting flight performance. Antigravity MN6007 II Highlights: Flight time up to 50 mins Max. thrust up to 5.5kg Lower coging torque Ultra light,high efficiency Test Item: KV320 Motor Dimensions: Φ67  x 30.1mm Lead: Enameled Wire 60mm [...] - [T-Motor Antigravity MN5008 400KV](https://vegadrones.in/product/t-motor-antigravity-mn5008-400kv/): About T-MOTOR MN5008 Multirotor VTOL UAV Motor KV400 T-Motor Antigravity MN5008 KV400 is a high-performance brushless motor designed for professionals who demand the best in power, efficiency, and stability. Whether you're capturing breathtaking aerial photography or performing detailed surveying, this ultralight motor ensures long flight times and exceptional maneuverability, even in challenging conditions. Antigravity MN5008 Highlights: • Ultra light, high efficiency • Devote to long flight • Quadcopter of 4.2kg, 60mins flight time • Run smoothly, low cogging torque " Antigravity Series" motors are an ultra-light zero gravity for Multi-rotor motor. High-Qualityimported Materials; High Slot Space Factor On Winding For Longer, Clearer And More Stable Flight. Application Areas： Multi-rotors, VTOL，UAVs，Heavy-duty professional drones Aerial photography Surveying and mapping Rescue Packing List Includes: 1 x T-MOTOR MN5008 KV400( kv which you choose) 1 x Hardware pack Matching Guide: T-MOTOR Propeller P17*5.8 / FLAME 60A 12S ESC If you have any questions or inquires, please contact us:  onlinesales@tmotor.com Technical Drawing Specification Motor Size Φ55.6*32mm Copper Wire 180℃ high temperature resistance: Level H Stator Imported silicon steel sheet; Anti-rust treatment; 180℃high temperature-resisting coatings Coil Insulation Test 500V Configuration 24N28P Centrifugal Cooling Design YES Shaft Diameter IN：6mm Rotor Dynamic Balance Standard ≤15mg Bearing Imported 696ZZ Motor Dynamic Balance Standard ≤10mg Magnet Level 150℃high temperature resistance: Level E Packing Size 106*81*35mm Lead Cable 80mm KV 170 Rated Voltage(Lipo) 6-12S Idle Current(22V) 0.4A ESC Recommendation FLAME 60A 12S Peak Current(180s) 15A Propeller Recommendation P17-18" Max. Power(180s) 720W Motor Weight(Incl. Cable) 128g Internal Resistance 270mΩ Package Weight 190g KV 340 Rated Voltage(Lipo) 6S Idle Current(22V) 0.9A ESC Recommendation AIR 40A Peak Current(180s) 35A Propeller Recommendation P17-18" Max. Power(180s) 760W Motor Weight(Incl. Cable) 135g Internal Resistance 55mΩ Package Weight 200g KV 400 Rated Voltage(Lipo) 6S Idle Current(22V) 1.1A ESC Recommendation AIR 40A Peak Current(180s) 35A Propeller Recommendation P15-17" Max. Power(180s) 800W Motor Weight(Incl. Cable) 132g Internal Resistance 50mΩ Package Weight 200g Test Data Type Propeller Throttle Voltage (V) Current (A) Power (W) RPM Torque (N*m) Thrust (g) Efficiency (g/W) Operating Temperature (℃) MN5008 KV170 T-MOTOR P17*5.8" CF 40% 47.41 1.17 55 2868 0.13 682 12.34 63 45% 47.39 1.57 74 3207 0.17 849 11.43 50% 47.36 2.10 100 3588 0.21 1058 10.62 55% 47.34 2.76 131 3952 0.26 1285 9.84 60% 47.31 3.46 164 4279 0.29 1515 9.25 65% 47.28 4.23 200 4579 0.34 1739 8.7 70% 47.24 5.11 242 4872 0.39 1991 8.24 75% 47.21 6.10 288 5172 0.44 2234 7.76 80% 47.17 7.20 340 5465 0.50 2509 7.38 90% 47.08 9.91 466 6025 0.62 3116 6.68 100% 47.03 11.46 539 6294 0.69 3449 6.4 T-MOTOR P18*6.1" CF 40% 47.39 1.51 71 2807 0.19 868 12.15 89 45% 47.37 2.05 97 3120 0.24 1096 11.28 50% 47.34 2.74 130 3477 0.29 1343 10.34 55% 47.30 3.63 171 3819 0.36 1633 9.52 60% 47.27 4.57 216 4125 0.42 1926 8.93 65% 47.23 5.63 266 4410 0.48 2229 8.39 70% 47.19 6.73 317 4663 0.53 2519 7.94 75% 47.15 8.01 378 4945 0.60 2821 7.47 80% 47.10 9.48 446 5208 0.67 3156 7.07 90% 46.99 12.85 604 5716 0.81 3807 6.3 100% 46.94 14.63 687 5963 0.87 4100 5.97 MN5008 KV340 T-MOTOR P17*5.8" CF 40% 23.47 2.88 68 3057 0.16 776 11.5 61 45% 23.43 3.98 93 3443 0.19 986 10.56 50% 23.38 5.33 125 3835 0.24 1224 9.82 55% 23.33 6.86 160 4191 0.28 1455 9.09 60% 23.27 8.53 199 4511 0.34 1697 8.55 65% 23.21 10.38 241 4808 0.38 1936 8.03 70% 23.15 12.40 287 5097 0.42 2176 7.58 75% 23.08 14.71 339 5392 0.48 2440 7.19 80% 23.00 17.16 395 5674 0.53 2701 6.85 90% 22.82 23.18 529 6230 0.65 3277 6.2 100% 22.72 26.39 600 6482 0.69 3556 5.93 T-MOTOR P18*6.1" CF 40% 23.44 3.76 88 2958 0.21 996 11.29 88 45% 23.39 5.12 120 3314 0.27 1238 10.34 50% 23.33 6.93 162 3677 0.32 1541 9.54 55% 23.26 8.95 208 4013 0.38 1822 8.75 60% 23.19 11.12 258 4303 0.45 2120 8.22 65% 23.11 13.46 311 4579 0.50 2394 7.7 70% 23.04 16.01 369 4846 0.56 2675 7.26 75% 22.95 18.83 432 5111 0.62 2966 6.86 80% 22.86 22.02 503 5370 0.70 3262 6.48 90% 22.63 29.46 667 5842 0.83 3909 5.86 100% 22.51 33.50 754 6049 0.89 4215 5.59 MN5008 KV400 T-MOTOR P15*5" CF 40% 23.48 2.82 66 3542 0.12 672 10.16 42 45% 23.44 3.78 89 3977 0.15 845 9.52 50% 23.40 4.95 116 4402 0.19 1033 8.92 55% 23.35 6.26 146 4789 0.22 1223 8.37 60% 23.30 7.66 178 5151 0.26 1409 7.9 65% 23.25 9.26 215 5489 0.29 1610 7.48 70% 23.19 10.98 255 5816 0.33 1811 7.11 75% 23.13 13.04 302 6178 0.38 2048 6.79 80% 23.06 15.31 353 6517 0.42 2286 6.48 90% 22.90 20.60 472 7180 0.50 2782 5.9 100% 22.81 23.44 535 7502 0.55 3027 5.66 T-MOTOR P16*5.4" CF 40% 23.46 3.22 76 3429 0.15 803 10.63 58 45% 23.41 4.46 104 3874 0.19 1021 9.78 50% 23.36 5.93 138 4303 0.24 1259 9.1 55% 23.31 7.54 176 4665 0.27 1492 8.5 60% 23.25 9.28 216 5016 0.32 1722 7.98 65% 23.19 11.19 260 5341 0.36 1956 7.53 70% 23.13 13.16 304 5645 0.41 2185 7.18 75% 23.05 15.66 361 5975 0.46 2458 6.81 80% 22.96 18.53 425 6293 0.52 2750 6.47 90% 22.77 24.84 566 6896 0.63 3323 5.87 100% 22.67 28.16 638 7165 0.67 3591 5.63 T-MOTOR P17*5.8" CF 40% 23.44 3.71 87 3348 0.18 917 10.54 81 45% 23.39 5.18 121 3777 0.23 1170 9.65 50% 23.33 6.99 163 4192 0.28 1447 8.88 55% 23.26 8.88 207 4540 0.33 1712 8.29 60% 23.20 10.92 253 4867 0.38 1963 7.75 65% 23.13 13.17 305 5175 0.44 2230 7.32 70% 23.05 15.72 362 5478 0.49 2491 6.88 75% 22.97 18.31 421 5770 0.55 2757 6.56 80% 22.87 21.65 495 6062 0.61 3090 6.24 90% 22.65 28.93 655 6610 0.73 3697 5.64 100% 22.53 32.83 740 6860 0.78 3982 5.38 Note: Motor temperature is motor surface temperature at 100% throttle running 10mins. (Date above based on benchtest are for reference only, comparion with that of other motor types is not recommended.) Packing List - [T Motor Antigravity MN5008 KV340](https://vegadrones.in/product/t-motor-antigravity-mn5008-kv340/): About T-MOTOR MN5008 Multirotor VTOL UAV Motor KV340 T-Motor Antigravity MN5008 KV340 is a high-performance brushless motor designed for professionals who demand the best in power, efficiency, and stability. Whether you're capturing breathtaking aerial photography or performing detailed surveying, this ultralight motor ensures long flight times and exceptional maneuverability, even in challenging conditions. Antigravity MN5008 Highlights: • Ultra light, high efficiency • Devote to long flight • Quadcopter of 4.2kg, 60mins flight time • Run smoothly, low cogging torque " Antigravity Series" motors are an ultra-light zero gravity for Multi-rotor motor. High-Qualityimported Materials; High Slot Space Factor On Winding For Longer, Clearer And More Stable Flight. Application Areas： Multi-rotors, VTOL，UAVs，Heavy-duty professional drones Aerial photography Surveying and mapping Rescue Packing List Includes: 1 x T-MOTOR MN5008 KV340( kv which you choose) 1 x Hardware pack Matching Guide: T-MOTOR Propeller P17*5.8 / FLAME 60A 12S ESC If you have any questions or inquires, please contact us:  onlinesales@tmotor.com   Technical Drawing Specification Motor Size Φ55.6*32mm Copper Wire 180℃ high temperature resistance: Level H Stator Imported silicon steel sheet; Anti-rust treatment; 180℃high temperature-resisting coatings Coil Insulation Test 500V Configuration 24N28P Centrifugal Cooling Design YES Shaft Diameter IN：6mm Rotor Dynamic Balance Standard ≤15mg Bearing Imported 696ZZ Motor Dynamic Balance Standard ≤10mg Magnet Level 150℃high temperature resistance: Level E Packing Size 106*81*35mm Lead Cable 80mm KV 170 Rated Voltage(Lipo) 6-12S Idle Current(22V) 0.4A ESC Recommendation FLAME 60A 12S Peak Current(180s) 15A Propeller Recommendation P17-18" Max. Power(180s) 720W Motor Weight(Incl. Cable) 128g Internal Resistance 270mΩ Package Weight 190g KV 340 Rated Voltage(Lipo) 6S Idle Current(22V) 0.9A ESC Recommendation AIR 40A Peak Current(180s) 35A Propeller Recommendation P17-18" Max. Power(180s) 760W Motor Weight(Incl. Cable) 135g Internal Resistance 55mΩ Package Weight 200g KV 400 Rated Voltage(Lipo) 6S Idle Current(22V) 1.1A ESC Recommendation AIR 40A Peak Current(180s) 35A Propeller Recommendation P15-17" Max. Power(180s) 800W Motor Weight(Incl. Cable) 132g Internal Resistance 50mΩ Package Weight 200g Test Data Type Propeller Throttle Voltage (V) Current (A) Power (W) RPM Torque (N*m) Thrust (g) Efficiency (g/W) Operating Temperature (℃) MN5008 KV170 T-MOTOR P17*5.8" CF 40% 47.41 1.17 55 2868 0.13 682 12.34 63 45% 47.39 1.57 74 3207 0.17 849 11.43 50% 47.36 2.10 100 3588 0.21 1058 10.62 55% 47.34 2.76 131 3952 0.26 1285 9.84 60% 47.31 3.46 164 4279 0.29 1515 9.25 65% 47.28 4.23 200 4579 0.34 1739 8.7 70% 47.24 5.11 242 4872 0.39 1991 8.24 75% 47.21 6.10 288 5172 0.44 2234 7.76 80% 47.17 7.20 340 5465 0.50 2509 7.38 90% 47.08 9.91 466 6025 0.62 3116 6.68 100% 47.03 11.46 539 6294 0.69 3449 6.4 T-MOTOR P18*6.1" CF 40% 47.39 1.51 71 2807 0.19 868 12.15 89 45% 47.37 2.05 97 3120 0.24 1096 11.28 50% 47.34 2.74 130 3477 0.29 1343 10.34 55% 47.30 3.63 171 3819 0.36 1633 9.52 60% 47.27 4.57 216 4125 0.42 1926 8.93 65% 47.23 5.63 266 4410 0.48 2229 8.39 70% 47.19 6.73 317 4663 0.53 2519 7.94 75% 47.15 8.01 378 4945 0.60 2821 7.47 80% 47.10 9.48 446 5208 0.67 3156 7.07 90% 46.99 12.85 604 5716 0.81 3807 6.3 100% 46.94 14.63 687 5963 0.87 4100 5.97 MN5008 KV340 T-MOTOR P17*5.8" CF 40% 23.47 2.88 68 3057 0.16 776 11.5 61 45% 23.43 3.98 93 3443 0.19 986 10.56 50% 23.38 5.33 125 3835 0.24 1224 9.82 55% 23.33 6.86 160 4191 0.28 1455 9.09 60% 23.27 8.53 199 4511 0.34 1697 8.55 65% 23.21 10.38 241 4808 0.38 1936 8.03 70% 23.15 12.40 287 5097 0.42 2176 7.58 75% 23.08 14.71 339 5392 0.48 2440 7.19 80% 23.00 17.16 395 5674 0.53 2701 6.85 90% 22.82 23.18 529 6230 0.65 3277 6.2 100% 22.72 26.39 600 6482 0.69 3556 5.93 T-MOTOR P18*6.1" CF 40% 23.44 3.76 88 2958 0.21 996 11.29 88 45% 23.39 5.12 120 3314 0.27 1238 10.34 50% 23.33 6.93 162 3677 0.32 1541 9.54 55% 23.26 8.95 208 4013 0.38 1822 8.75 60% 23.19 11.12 258 4303 0.45 2120 8.22 65% 23.11 13.46 311 4579 0.50 2394 7.7 70% 23.04 16.01 369 4846 0.56 2675 7.26 75% 22.95 18.83 432 5111 0.62 2966 6.86 80% 22.86 22.02 503 5370 0.70 3262 6.48 90% 22.63 29.46 667 5842 0.83 3909 5.86 100% 22.51 33.50 754 6049 0.89 4215 5.59 MN5008 KV400 T-MOTOR P15*5" CF 40% 23.48 2.82 66 3542 0.12 672 10.16 42 45% 23.44 3.78 89 3977 0.15 845 9.52 50% 23.40 4.95 116 4402 0.19 1033 8.92 55% 23.35 6.26 146 4789 0.22 1223 8.37 60% 23.30 7.66 178 5151 0.26 1409 7.9 65% 23.25 9.26 215 5489 0.29 1610 7.48 70% 23.19 10.98 255 5816 0.33 1811 7.11 75% 23.13 13.04 302 6178 0.38 2048 6.79 80% 23.06 15.31 353 6517 0.42 2286 6.48 90% 22.90 20.60 472 7180 0.50 2782 5.9 100% 22.81 23.44 535 7502 0.55 3027 5.66 T-MOTOR P16*5.4" CF 40% 23.46 3.22 76 3429 0.15 803 10.63 58 45% 23.41 4.46 104 3874 0.19 1021 9.78 50% 23.36 5.93 138 4303 0.24 1259 9.1 55% 23.31 7.54 176 4665 0.27 1492 8.5 60% 23.25 9.28 216 5016 0.32 1722 7.98 65% 23.19 11.19 260 5341 0.36 1956 7.53 70% 23.13 13.16 304 5645 0.41 2185 7.18 75% 23.05 15.66 361 5975 0.46 2458 6.81 80% 22.96 18.53 425 6293 0.52 2750 6.47 90% 22.77 24.84 566 6896 0.63 3323 5.87 100% 22.67 28.16 638 7165 0.67 3591 5.63 T-MOTOR P17*5.8" CF 40% 23.44 3.71 87 3348 0.18 917 10.54 81 45% 23.39 5.18 121 3777 0.23 1170 9.65 50% 23.33 6.99 163 4192 0.28 1447 8.88 55% 23.26 8.88 207 4540 0.33 1712 8.29 60% 23.20 10.92 253 4867 0.38 1963 7.75 65% 23.13 13.17 305 5175 0.44 2230 7.32 70% 23.05 15.72 362 5478 0.49 2491 6.88 75% 22.97 18.31 421 5770 0.55 2757 6.56 80% 22.87 21.65 495 6062 0.61 3090 6.24 90% 22.65 28.93 655 6610 0.73 3697 5.64 100% 22.53 32.83 740 6860 0.78 3982 5.38 Note: Motor temperature is motor surface temperature at 100% throttle running 10mins. (Date above based on benchtest are for reference only, comparion with that of other motor types is not recommended.) Packing List - [Emax MT2213 935KV Brushless DC Motor Black Cap (CW Motor Rotation) With Prop1045 Combo](https://vegadrones.in/product/emax-mt2213-935kv-brushless-dc-motor-black-cap-cw-motor-rotation-with-prop1045-combo/): If you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project. This motor provides a Motor kV of 2200. In the field of Multirotors, there are so many brands that are making drone motors but Emax is giving us the best quality of drone motor at an affordable price. Emax brand gained more popularity in the market due to the highest standards for optimal performance and reliability. Note: The BLDC motor rotation is always opposite to the direction of Thread. As in this case, the motor rotation direction is CCW, so the Thread tightening direction will be CW <“right-handed-thread”>. This is CCW rotating BLDC Motor, for CW rotating BLDC motor, Click here To Explore Various kinds of Propellers, Click here  To Explore Various kinds of ESC’s, Click here Robu. in is the official Distributor of Emax in India. Features :  Vibration-free operation. Very easy to install. Windings are made from copper of high purity. Powered by highest grade neodymium magnets. Generates less heat during operations. Package includes : 1 x  Emax MT2213 935KV brushless motor 1 x Pair 1045 Propeller and Accessories(as shown in the image) Motor KV (RPM/V): 935 Motor Type: Brushless Motor Compatible LiPO Batteries: 3S to 4S Model No.: MT2213 Maximum Thrust (gm) 840 Required ESC (A) 18 Framework 12N14P Compatible Prop (inch): 8 ~ 10 Length (mm): 39.5 Width (mm): 28 Weight (g): 53 Shipping Weight 0.06 kg Shipping Dimensions 30 × 5 × 3 cm - [Emax MT2213 935KV Brushless DC Motor for Drone – Red Cap (CCW) With 1045 Propeller Combo](https://vegadrones.in/product/emax-mt2213-935kv-brushless-dc-motor-for-drone-red-cap-ccw-with-1045-propeller-combo/): If you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project. This motor provides a Motor kV of 935. In the field of Multirotors, there are so many brands that are making drone motors but Emax is giving us the best quality of drone motor at an affordable price. Emax brand gained more popularity in the market due to the highest standards for optimal performance and reliability. Note: The BLDC motor rotation is always opposite to the direction of Thread. As in this case, the motor rotation direction is CCW, so the Thread tightening direction will be CW <“Left-handed-thread”>. This is CW rotating BLDC Motor, for CCW rotating BLDC motor, Click here To Explore more Drone motors, Click here To Explore Various kinds of Propellers, Click here  To Explore Various kinds of ESC’s, Click here Robu. in is the official Distributor of Emax in India. Features :  Vibration-free operation. Very easy to install. Windings are made from copper of high purity. Powered by highest grade neodymium magnets. Generates less heat during operations. Package includes : 1 x  EMAX MT2213 935KV Brushless DC Motor 1 x Pair of 1045 Propeller and accessories(as shown in the image) Motor KV (RPM/V): 935 Motor Type: Brushless Motor Compatible LiPO Batteries: 3S to 4S Model No.: M2213 Maximum Thrust (gm) 840 Required ESC (A) 18 Framework 12N14P Compatible Prop (inch): 8 ~ 10 Length (mm): 39.5 Width (mm): 28 Weight (g): 53 Shipping Weight 0.07 kg Shipping Dimensions 30 × 5 × 3 cm - [Emax ECOII-2004-2400KV Brushless Motor](https://vegadrones.in/product/emax-ecoii-2004-2400kv-brushless-motor/): This is a Emax ECOII-2004-2400KV Brushless Motor. The engineers at Emax are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors that further improved performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance of its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust are generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Features: Precision bearing Steel shaft Anodizing 19 x 19mm hole pattern Multi-strand winding. Package Includes: 5 x M2 x 6mm Screw 5 x M2 x 7.5mm screw 3 x M2 x 8.5mm screw 1 x Washer and screw for shaft Motor KV (RPM/V): 2400 Motor Type: Brushless Motor Compatible LiPO Batteries: 4S to 6S Framework 12N14P Length (mm): 19.2mm Diameter 24.7mm Maximum Thrust (gm) 950g(on 6s) Compatible Prop (inch): 4″-5″ Weight (g): 16.6g (w/o silicone wire) Shaft Diameter (mm): 1.5mm Shipping Weight 0.055 kg Shipping Dimensions 7 × 4 × 4 cm - [iFlight Analog FPV Goggles with DVR function](https://vegadrones.in/product/iflight-analog-fpv-goggles-with-dvr-function/): Experience immersive FPV racing with these lightweight goggles, featuring a 4.3-inch high-brightness LCD, built-in DVR for recording, and a 40CH 5.8GHz receiver with RaceBand support. Designed for comfort and performance, they offer up to 3.5 hours of continuous use with an ergonomic fit and adjustable headband. - [XING 2207 Unibell 1855kv](https://vegadrones.in/product/xing-2207-unibell/): XING2 2207 FPV Motor Unibell – 2755KV motors are the latest evolution in the renowned XING series, setting a new benchmark for FPV performance. Building on the success of the original XING motors, known for their curved design, internal damping ring, high-quality NSK bearings, and titanium alloy shaft, the XING2 introduces advanced upgrades for unmatched efficiency and power. With new center-slotted N52H curved arc magnets, the XING2 drastically reduces motor response time, addressing the translation delay in braking and acceleration for a more locked-in flight feel. Enhanced manufacturing precision minimizes the magnet air gap and stator lamination, increasing magnetic flux for greater efficiency and higher power output. Designed with durability in mind, the XING2 features a robust bell-to-shaft connection and premium materials, ensuring reliability during intense flights. Whether you’re a racer or freestyle pilot, the XING2 motors deliver smooth, powerful, and responsive performance that exceeds expectations. Features: 5mm titanium alloy shaft, our strongest prop shaft ever! Crash resistant 7075 aluminum bell Smooth and long-lasting NSK 9x4x4 bearings Center slotted N52H curved arc magnets XING O-ring bearing gap protection Motor wires protector Dynamically balanced Package Includes: 1 x XING2 2207 Black Brushless Motor 4 x M3*10 screws 1 x M5 Flanged Nylon Insert Lock Nut Motor Type: FPV Motor Motor KV (RPM/V): 2755 Input Voltage 16V Watts 645.60W Mounting holes 16*16 φ3mm Shaft Diameter (mm): 5mm Shaft Length 13.5 mm Lead Cable 160 mm Configuration: 12N14P Bearing Type NSK Bearing Size φ9*φ4*4 Winding Type Single Strand copper winding Magnets N52H Curved Shipping Weight 0.044 kg Shipping Dimensions 5 × 64 cm - [ECHO 25G8 Patch Feeder Antenna](https://vegadrones.in/product/echo-25g8-patch-feeder-antenna/): The Foxeer Echo 25.8g Patch Feeder Antenna is designed for enthusiasts who demand exceptional performance and reliability in their aerial systems. Perfectly engineered for FPV (First Person View) applications, this antenna combines advanced technology with a lightweight design, making it an ideal choice for both racing and recreational drone flying.   Features High Gain: With an impressive 9 dBi gain, the Echo antenna enhances signal strength, ensuring a stable and clear connection during flight. Wide Beam Width: The antenna offers a beam width of 120°, allowing for excellent coverage and minimizing the risk of signal dropouts. Durable Construction: Made with [...] - [EMAX BLHeli 30A ESC](https://vegadrones.in/product/blheli-30a-esc/): Emax’s BLHeli Series 30A ESC with Oneshot is designed specifically for FPV racing. The Emax series is a line of high-performance and low-cost ESCs for drone motors. Emax’s ESC’S are 100% guaranteed original and genuine products for the beginner who wants to learn how to build a drone. EMAX BLHELI SERIES 30A ESC  is a brushless dc motor speed controller. The low output resistance greatly enhances power stability because The ESC is adapting a 2-4S Lipo battery which improves good battery life. The EMAX BLHELI ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for the last 10 seconds only. If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project. For more 30A ESCs, Click here Features : Based on BLHeli firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection, and throttle signal loss protection. Separate power supply for MCU and BEC, enhancing the ESC’s ability to eliminate magnetic interference. Parameters of the ESC can be set via a program card or transmitter. Throttle range can be set to be compatible with different receivers. Equipped with built-in linear BEC or switch BEC. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole. Package Includes : 1 x Emax BLHeli Series 30A ESC with Oneshot (Original) Item Type: Brushless ESC Model Name Emax BLHeli Series 30A Burst Current (A) 40 Constant Current (A) 30 BEC (Y/N): (5V/2A), Yes Compatible LiPO Batteries: 2S to 4S Color: Black Dimensions (L x W x H) mm 52 x 26 x 7 Weight (g): 28 Application BLDC Motors, Multirotors, Rc Planes etc. GTIN 608763428583 Shipping Weight 0.03 kg Shipping Dimensions 8 × 6 × 3 cm - [XING 1806 Unbell 2500kv](https://vegadrones.in/product/xing-1806-unbell/): The iFlight XING2 1806 Unibell Brushless Motor is designed to deliver exceptional performance for FPV racing and freestyle drones. Building on the success of the original XING motors, the XING2 series introduces advanced engineering and premium materials to set a new standard in power, efficiency, and reliability. With features like centre-slotted N52H curved arc magnets, the XING2 1806 motor drastically reduces response time for braking and acceleration, giving pilots the locked-in control they’ve always desired. The reduced magnet air gap and stator lamination further enhance efficiency and power output, while the durable titanium alloy shaft and high-quality Japanese NSK bearings ensure long-lasting performance. This motor is available in two KV options: 1600KV and 2500KV, making it available for different flying styles and setups. The motor weighs just 20.2g (including wires) and has compact dimensions of 25.2mm x 16.3mm, making it lightweight and ideal for high-performance builds. It operates on an input voltage of 24V, with a peak current of 13.99A for the 1600KV model and 25.06A for the 2500KV model. The maximum power output is 336W for the 1600KV version and an impressive 601W for the 2500KV version. The XING2 1806 motor features a 1.5mm titanium alloy shaft with a protruding length of 4mm, and it uses high-quality NSK bearings for smooth and reliable operation. The motor is built with a Unibell rotor design, N52H curved magnets, and single-strand copper winding, ensuring durability and efficiency What's in the Box? The package includes the following items. Item Quantity XING2 1806 Unibell Motor 1 M2 x 8mm Screws 6 Specification Technical specifications for iFlight XING2 1806 Unibell Brushless Motor. Specification 1600KV 2500KV Model XING2 1806 Motor Rotor Design Unibell Configuration 12N14P Input Voltage 24V Peak Current 13.99A 25.06A Max Power 336W 601W Interphase Resistance 320mΩ 124.5mΩ Dimensions 25.2mm x 16.3mm Mounting Holes 12 x 12mm, φ2mm Shaft Diameter 1.5mm Shaft Protruding Length 4mm Bearing Type NSK Magnet Type N52H Curved Magnets Winding Single-strand copper winding Lead Length 160mm, 22AWG Weight (with wires) 20.2g - [Connector MR30-F.G.Y](https://vegadrones.in/product/connector-mr30-f-g-y/): The Amass MR30 Female Connector (model MR30-F.G.Y) is a high-quality, reliable electrical connector designed for secure connections in various electronic and aerospace applications. It is particularly well-suited for use in drone and RC (remote control) systems, where durability and precise connectivity are essential. Features: Versatile Use High-Quality Contacts Compact Design Robust Construction Secure Connection Package Includes: 1 x Amass MR30 Female Connector – MR30-F.G. Item Type: Connector Gender: Female Model Name MR30 Rated Voltage (V): DC 500V Continuous Current (A): 15A Instantaneous current 30A Color: Yellow Contact Type: Gold-plated copper Material: PA66 Additional Specs.: Cross tube length: 20-16AWG, UL94 V-0 Shipping Weight 0.003 kg Shipping Dimensions 9 × 6 × 1 cm - [Connector MR30-M.G.Y](https://vegadrones.in/product/connector-mr30-m-g-y/): The Amass MR30 Male Connector – MR30-M.G.Y is a specialized electrical connector designed primarily for use in radio-controlled (RC) hobby applications, particularly for connecting batteries to power systems in RC vehicles and drones. Features: Easy to use Easy to connect Good quality product Package Includes: 1 x Amass MR30 Male Connector – MR30-M.G.Y Item Type: Battery Connector Model Series: MR30 Gender: Male Rated Current (A): 20A MAX(16AWG/△<85℃) Max Voltage 500V DC Mechanical Lifetime 100 Protection level IP40 Operating Temperature (°C): -20℃-120℃ Flammability Rating UL94-V0 Shipping Weight 0.001 kg Shipping Dimensions 12 × 8 × 1 cm - [Caddx Walksnail Avatar GT KIT](https://vegadrones.in/product/caddx-walksnail-avatar-gt-kit/): 2W (Max) Long Range 11.1V-25.2V 1080P 100fps Dual Antennas High Frame Starlight Micro SD Card Slot Compatible Moonlight Camera（DVR 4K） Bullet Points: Avatar GT significantly enhances signal transmission distance, meeting various flight requirements, and can reach up to 2W power within legal and regulatory limits, ensuring uninterrupted flight exploration and enhancing your FPV experience. The Avatar GT features a top-mounted heatsink design, effectively dissipating heat to maintain optimal performance even during extended operation. The Avatar GT is equipped with a Micro SD card slot, supporting up to 256GB of storage capacity, enabling uninterrupted recording of HD flight videos in either 1080p [...] - [M10Q V2 180 Module](https://vegadrones.in/product/m10q-v2-180-module/): The Foxeer M10Q 180 V2 is a reliable GPS module with an integrated compass. With its dimensions of 18x18x8 mm, it offers a good balance between size and antenna sensitivity, making it particularly suitable for standard 5″ drones or cinewhoops. The M10Q 180 is built on the new UBLOX M10050 chip, which surpasses older GPS modules with the M8 chip in both speed and accuracy. The module supports GPS, GLONASS, and BDS. The compass is especially appreciated by users of the iNav firmware. In the second version, the GPS module uses the IST8310 compass. Key Features Chip: M10050 Frequency: GPS L1GLONASS L1BDS B1GALILEO ESBAS L1QZSS L1 Number of channels: 72 [...] - [CADDX Walksnail Avatar HD Goggles L](https://vegadrones.in/product/walksnail-avatar-hd-goggles-l/): Preface About Goggles L To provide users with a cost-effective entry into HD systems while ensuring an excellent experience, we have developed the first single-screen HD goggles equipped with head tracking functionality. This innovative device is designed to deliver an unparalleled FPV experience, allowing pilots to enjoy the combined benefits of head tracking and HD visuals. Bullet Points:  The goggles are equipped with an in-house developed full-stack image transmission head tracking system. The head tracking sensor, employing a nine-axis gyro module, is integrated into the goggles to capture the pilot’s head movements. Paired with a gimbal, it sends signals via [...] - [CADDX FPV vista 20cm coaxial cable](https://vegadrones.in/product/caddx-fpv-vista-20cm-coaxial-cable/) - [T-Motor AM480 650KV](https://vegadrones.in/product/am480-650kv/): The T-Motor AM480 3D 5-6S 650KV Freestyle Flight Plane Motor is a high-performance motor designed for freestyle and 3D flight enthusiasts. Built for 5-6S setups,AM480 3D 5-6S 650KV Freestyle Flight Plane Motor  provides excellent power and thrust, making it ideal for demanding maneuvers and precise control during aerobatic flight. The 650KV rating ensures efficient power delivery, offering smooth performance and longer flight times. With its robust construction and high-quality materials, T Motors AM480 3D 5-6S 650KV Freestyle Flight Plane Motor motor is engineered for durability and reliability, making it a great choice for pilots looking to take their freestyle flying to the next level. Whether performing flips, rolls, or other dynamic movements, the AM480 ensures stability and control for an optimal flight experience. Features: The T-Motor AM480 is very well made. Thanks to the ripples on the motor bell and the hollow shaft, the motor is more robust and lighter. The ratio of diameter and engine height ratio is 3:1 for higher torque and better cooling. Optimize structural design, lighter and more durable achieving load-free flight Great Power: Delivers strong and consistent power for thrilling flights. High Top Speed: Engineered for top speeds, providing fast and responsive control. Improved Explosion Resistance: Enhanced durability allows for smooth recovery during extreme maneuvers. Curved Magnet Design: Optimized for stronger magnetism and smoother motor operation, ensuring efficient flight dynamics. High-Quality Components: Made with premium materials for long-lasting and reliable performance. Package Includes: 1 x T-MOTOR AM480 Motor 1 x Hardware pack Model Name T Motors AM480 3D Motor KV (RPM/V): 650 Shaft Diameter IN：6mm, OUT：6mm Lead Wire Enameled Wire 90mm Idle Current 1.55A Peak Current (A) 55A Voltage Rating: 5-6S Configuration: 24N28P Motor Dimensions Motor Dimensions Max. Power 1150W Weight (g): 145 Shipping Weight 0.05 kg Shipping Dimensions 5 × 5 × 5 cm   - [MicoAir405v2 50A Bluejay Stack](https://vegadrones.in/product/micoair405v2-50a-bluejay-stack/): MicoAir405v2 – Flight Controller – MicoAir Tech - [MicoAir743v2 -AIO-45A](https://vegadrones.in/product/micoair743v2-aio-45a/): MicoAir743v2-AIO-45A – Flight Controller – MicoAir Tech   - [MicoAir743v2 70A AM32 Stack](https://vegadrones.in/product/micoair743v2-75a-am32-stack/): Default Firmware: Ardupilot or PX4 (Depending on order). You can flash Betaflight or INAV firmware if needed.   - [Mark4 - 5 Inch Frame](https://vegadrones.in/product/mark4-5-inch-frame/): The Mark4  5Inch 225mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability. Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The frame has a wheelbase of 225mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame [...] - [Mark4 - 7 Inch Frame](https://vegadrones.in/product/mark4-7-inch-frame/): The GEPRC -Mark4 Frame (GP101182) is a 7-inch freestyle drone frame designed for durability, performance, and easy installation. Made from premium 3K carbon fiber, it supports both 16x16mm and 19x19mm motor mounting. With precision CNC machining and compatibility with DJI FPV Air Unit, it ensures strength, versatility, and a clean build. Enhanced crash resistance, quick maintenance features, and stable electronic housing make it ideal for demanding FPV pilots. Compatible with DJI FPV Air Unit. Full 3K carbon fiber, CNC processed. Supports 16x16mm & 19x19mm motor mounts. Quick-swap arms, easy maintenance. Features: Designed to perfectly fit DJI FPV Air Unit. Motor [...] - [HGLRC M100 5883 GPS](https://vegadrones.in/product/hglrc-m100-5883-gps/): HGLRC M100-5883 GPS New upgraded 10th generation chip with compass Suitable for FPV fixed-wing UAV Technical Parameters: 1. Chip: M10 (tenth generation chip) 2. Antenna: ceramic antenna 3. Frequency: GPS/QZSS L1C/A, SBAS EGNOS, GAGAN, MSAS and WAAS GLONASS L1OF, BDS B1I, Galileo E1B/C 4. Receive channel: 72ch 5. Baud rate: 115200bps. 6. Output frequency: 10Hz 7. Power input: 3.3-5V 8. Size: 21x21x8.02mm 9. Weight: 7.73g - [MicoAir743v2 55A AM32 Stack](https://vegadrones.in/product/micoair743v2-55a-am32-stack/): MicoAir743 V2 55A AM32 Stack – Firmware & Compatibility The MicoAir743 V2 55A AM32 Stack delivers reliable performance, smooth motor control, and broad firmware compatibility, making it ideal for a wide range of multirotor and FPV builds. This stack ships preloaded with either ArduPilot or PX4 firmware, depending on your selected option at the time of purchase. For pilots who prefer alternative flight control systems, the stack also supports Betaflight and INAV, which can be flashed easily if required. Firmware Support Default Firmware: ArduPilot or PX4 (based on order selection) Optional Firmware: Betaflight, INAV (user-flashable) ESC Firmware: AM32 for smooth, [...] - [Mark4 - 8 Inch Frame](https://vegadrones.in/product/mark4-v2-8-367mm/): Mark4 V2 8″ 367mm Carbon Fiber Frame Kit designed for FPV freestyle racing drones. Featuring an X-type structure, 3K carbon fiber, 6mm arm thickness, and easy camera installation, it delivers unmatched durability and precision for high-speed racing. Description Mark4 V2 8Inch 367mm Carbon Fiber Frame Kit: Unmatched Durability for FPV Freestyle Racing Elevate your FPV freestyle racing experience with the Mark4 V2 8Inch 367mm Carbon Fiber Frame Kit. Engineered for strength and performance, this quadcopter frame features 3K carbon fiber construction and a robust X-type structure, ensuring stability and precision during high-speed races. With a wheelbase of 367mm and 6mm [...] - [15 Inch FPV Frame](https://vegadrones.in/product/mark4-v3-13-570mm/): Mark4 V3 13 Inches 570mm Carbon Fiber Frame The Mark4 V3 13-Inch 570mm Carbon Fiber Frame is a high-performance drone frame specially designed for freestyle and long-range FPV flying. Its 570mm wheelbase is perfect for large-size motors and 13-inch propellers. This frame is constructed from high-quality carbon fiber, making it both strong and lightweight — reducing the risk of damage during high-speed flights or accidental crashes. It features 8mm thick arms, which provide excellent stability and vibration resistance. The frame offers multiple mounting options inside — including 20x20mm and 30.5×30.5mm flight controller stack mounts. The motor mounts are 21x21mm, making [...] - [XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver](https://vegadrones.in/product/xr4-gemini-xrossband-dual-band-expresslrs-receiver/): The Radiomaster XR4 Gemini Xrossband ExpressLRS Receiver offers cutting-edge dual-band reliability in an ultra-compact package. Supporting both 2.4GHz and Sub-G 900MHz frequencies via twin LR1121 RF chips, it ensures unmatched RF stability. Integrated with ExpressLRS v3.5.1 and true diversity, this receiver enables rapid data handling, boasting up to 1000Hz refresh rates. Ideal for drones and fixed-wing aircraft, the XR4’s lightweight 1.7g design and dual CRSF/UART bus interfaces make it an elite choice for demanding pilots. Enhanced with built-in Wi-Fi for easy configuration, it delivers precision and rock-solid performance wherever your flight takes you. Features: Dual Semtech LR1121 transceivers for enhanced [...] - [TAKER F722 45A 32Bit AIO](https://vegadrones.in/product/taker-f722-45a-32bit-aio/): Summary The TAKER F722 45A 32Bit AIO features the STM32F722 MCU paired with the ICM42688-P (SPI) gyro, delivering powerful performance and fast processing. It offers 5 full UART ports to support various external devices. A dedicated 6-pin port on the bottom allows direct plug-in for HD VTXs, reducing soldering and simplifying installation. The 32-bit ESC firmware provides smooth control. Supports 2–6S batteries input, 45A continuous current, and 55A burst (10s). It also supports OSD tuning, buzzer, LED, and more, all in a lightweight 9.2g package. Feature Smooth throttle response with 32-bit ESC firmware. Built-in barometer, compatible with INAV firmware. Equipped [...] - [RAD Tiny 5.8G 400mW VTX](https://vegadrones.in/product/geprc-rad-tiny-5-8g-400mw-fpv-vtx/): Summary GEPRC RAD Tiny 5.8G 400mW VTX is compact and lightweight and can fit into tight spaces. It weighs only 1.1g (excluding antenna). It has 3 adjustable power levels, the maximum power is 400mW, and the signal is stable. With temperature control protection to prevent overheating and burning. IRC Tramp protocol, OSD quick parameter adjustment, one parameter adjustment button, three indicator lights, easy and fast operation. Specifications Model: GEPRC RAD Tiny 5.8G 400mW VTX Input Voltage: DC 5V Output Voltage: 5V(Power supply 5V to camera) Input Impedance: 75Ω Control protocol: IRC Tramp Antenna: UFL Output power: 25mW/200mW/400mW/PIT MODE Channels: 48CH [...] - [GEPRC MATEN 5.8G 1.6W VTX](https://vegadrones.in/product/maten-5-8g-1-6w-high-power-fpv-vtx/): MATEN 5.8G 1.6W VTX – High Power FPV Video Transmitter The MATEN 5.8G 1.6W VTX is a high-performance FPV video transmitter newly developed by the GEPRC team. Designed for long-range and high-power FPV flight, this VTX delivers stable signal transmission, excellent penetration, and reliable heat management, making it ideal for professional and freestyle drone pilots. With four adjustable power levels and a maximum output of 1600mW, the MATEN 5.8G VTX ensures clear and consistent video transmission even in demanding environments. Key Features of MATEN 5.8G 1.6W VTX High Power Output: Four adjustable power levels — 25mW / 200mW / 600mW [...] - [GEPRC MATEN 5.8G 5W VTX PRO](https://vegadrones.in/product/maten-5-8g-5w-pro-high-power-fpv-vtx/): Summary The MATEN 5.8G 5W VTX PRO is a high-performance VTX newly developed by the GEPRC team. With five adjustable power options, it delivers up to 5000mW of power, ensuring stable signal transmission and excellent penetration. Built with a high-strength CNC aluminum alloy shell, the MATEN 5.8G 5W VTX PRO offers superior heat dissipation and impact resistance. Its sleek design features a fan cooling function for optimal performance, while the built-in microphone transmits real-time audio from the FPV drone. Supporting the IRC Tramp protocol, it allows you to adjust parameters through OSD.  It operates within a voltage range of 7-36V [...] - [GEPRC TAKER F405 BLS 65A V2 STACK](https://vegadrones.in/product/geprc-taker-f405-bls-65a-v2-stack/): Features Use mainstream STM32F405 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With TAKER H65_8S_BLS 65A 4IN1 ESC, the flying feel is silky Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably 12V@2.5A + 5V@3A dual independent BEC Specifications GEP-F405-HD V3 Flight Controller MCU：STM32F405 IMU：ICM42688-P(SPI) Air Unit Connection：Direct plugging into DJI Air Unit Black Box：16M onboard Barometer: support Motor outputs：M1-M6 USB Interface：Type-C OSD：BetaFlight OSD w/ AT7456E chip BEC：5V@3A,12V@2.5A dual BEC Firmware Target：GEPRCF405 Size：37.15×37.15mm Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after [...] - [Triple Feed Patch-1 SMA](https://vegadrones.in/product/triple-feed-patch-1-sma/): Specification Center frequency: 5.8 GHz Bandwidth: 660 MHZ (5.47-6.13ghz) Match: S11 < -20 dB, VSWR < 1.22 (at the center frequency) Axial ratio: < 1.3 DBi antenna gain: 9.4 Half power beam width: 55 ° (horizontal and vertical) Radiation efficiency: 83.5% These values are based on simulation and the actual measurements are as follows (they are very similar). Due to the change of the FR4 dielectric constant, the center frequency may be transferred between batches. And not all FR4 brands have the same dielectric constant. The frequency conversion to 100 MHz is normal. Dimensions 150 × 150 × 60 mm - [GEP-CL35V2 Frame](https://vegadrones.in/product/gep-cl35v2-frame/): Summary The GEP-CL35 V2 version was released after careful development by the GEPRC team. GEP-CL35 V2 is developed and upgraded on the basis of CL35. It can be mounted with O3 VTX. The camera adopts the bottom-mounted shock absorption gimbal to solve the camera IMU’s resonance issue, and achieve a good anti-shaking effect. The main carbon plate and injection prop guards increased the 7075 aluminum column for structural strengthening. Battery installation method using a strap with 7075 aluminum parts fixed. Power XT60E1-M plug and carbon plate are integrated and integrated for convenient application. The prop guard adds a storage card and USB port to the O3 Air Unit for easy data [...] - [GEP-CL35 Frame](https://vegadrones.in/product/gep-cl35-frame/): CineLog35 3.5-Inch Cinematic FPV Frame – Lightweight & Durable Design The CineLog35 Frame, developed by GEPRC, is a high-performance 3.5-inch cinematic FPV frame designed specifically for mounting GoPro-style action cameras. Built as an upgraded evolution of the CineLog30, the CL35 offers stronger structure, improved compatibility, and smoother flight performance for professional cinematic flying. With an integrated propeller guard, reinforced frame structure, and upgraded damping system, the CineLog35 delivers stable, low-vibration footage while maintaining a lightweight body and responsive flight characteristics. Key Features of CineLog35 Frame Upgraded Design Based on CL30: Improved structure, stronger protection, and enhanced mounting compatibility. Integrated Propeller [...] - [GEP-Vapor-X5 O4 Pro Frame](https://vegadrones.in/product/gep-vapor-x5-o4-pro-frame/): Summary The GEPRC team presents the Vapor O4 Pro frame, designed specifically for the DJI O4 Air Unit Pro. With redesigned aluminum camera parts and improved vibration-damping silicone, this frame offers better compatibility. The new mech-inspired side panels add a bold, sharp look, enhancing the frame’s stylish design. Made from high-strength carbon fiber, it’s lightweight yet durable, ensuring top-notch performance in any flight. With its XH structure, the GEP-Vapor-X O4 Pro frame offers superior stability and precise handling. Features 1. 5mm wide carbon fiber arms for better rigidity and durability. 2. Dual protection with camera guard side panels and a [...] - [GEPRC EM4214 660KV Motor (Without printing on Motor)](https://vegadrones.in/product/geprc-em4214-660kv-motor/): Feature New EM series motors designed for long-range FPV  High-strength M6 steel shaft  High torque magnetic circuit design Specifications Model: EM4214 660KV Motor KV: 660KV Max Watt: 2120W Peak Current: 90A Interphase Resistance: 25mΩ Propeller: 12-14inch Propeller Magnet: N52H Bearing Type: NMB Configuration: 12N14P Dimension: φ49mmx32.5mm Shaft Diameter: φ6mm Shaft Protruding Length: 25.5mm Mounting holes: 30mmx30mm Lead: 800mm/14AWG Compatible ESC: 80A-100A Input Volts: 25.2V(6S LiPo) Winding: Single-strand copper winding Included Screws: Semi-spherical Head M4*10 (4PCS)/M6 Flange Nut (1PCS) Weight: 246g(included wire) Compatible Models: 12-14 inch long-range FPV Includes 1 x EM4214 motor 4 x M4*12 round head screws 1 x [...] - [TAKER H70_96K BL32 4IN1 ESC 70AE ESC](https://vegadrones.in/product/taker-h70_96k-bl32-4in1-esc-70ae-esc/): Specifications Input Voltage：3-6S Lipo Galvanometer：Support PWM frequency: 24~96K Continue Current：70A Burst Current：80A（5 second） Support Protocol：Dshot 150/300/600 Size：42.6*42.1mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle. Weight：12.8g Target：GEPRC_G071_4IN1_96K Includes 1 x ESC 1 x Capacitor 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x Silicone grommets - [GEPRC Peano 5.8G Antenna LHCP-MMCX-110MM](https://vegadrones.in/product/geprc-peano-5-8g-antenna-lhcp-mmcx-110mm/): Summary GEPRC Peano antenna is a 5.8G optimized antenna for FPV quad. The antenna has good gain performance and very compact. Working frequency range is 5600-5950 Ghz, with LHCP and RHCP options for multi-player competition. Peano 5.8G antenna also has a variety of connector options. Every antenna has been tested strictly before leaving the factory to ensure good performance. Features 1. Compact and light-weight design, high quality ABS case for good protection and nice appearance. 2. Options of LHCP and RHCP. 3. Manufactured and tested to highest standards 4. Easy to install, multiple connectors and length options. Specifications Frequency Range: [...] - [Radiomaster Nomad Gemini Xrossband Module](https://vegadrones.in/product/radiomaster-nomad-gemini-xrossband-module/): Presenting the RadioMaster Nomad: the next evolution in ExpressLRS RF design! The Nomad is equipped with dual 3rd-generation Semtech LR1121 transceivers, allowing for operation with both 2.4GHz and 868/900MHz frequencies using the advanced Gemini Xrossband protocol. This technology enables the transmitter to send packets on both bands simultaneously, reducing the risk of packet loss due to interference. With dual 1-watt dual-band transceivers, the Nomad has exceptional range and revolutionary interference rejection for demanding environments providing enhanced performance and reliability. The Nomad comes with a micro module and nano module adapter, ensuring it works with most radios on the market today. Whether [...] - [Radiomaster TX12 Controller](https://vegadrones.in/product/radiomaster-tx12-controller/): The Mighty, Mini TX12MKII radio has arrived! Many years ago, RadioMaster set out to create the very best compact radio in its class. The TX12 has become the go-to product for pilots who seek a powerful, dependable, and endlessly upgradable open-source radio in a small form factor. Working with the R/C community and open-source partners, RadioMaster proudly presents the TX12 MKII, a class-leading compact radio, with updated ergonomics, hardware, and software Features Added ExpressLRS Backpack support Updated main board design from STM32F207 to STM32F407 Improved USB-C QC 3.0 Charging Precision hall-effect gimbals as standard EdgeTX operating system installed from the factory Updated rear case with comfortable grips [...] - [Zerodrag STRIX-BOOST Stack (H7 FC + 55A ESC)](https://vegadrones.in/product/zerodrag-strix-boost-stack-h7-fc-55a-esc/): Zerodrag Strix H7 Flight Controller - [Mark4 - 10 Inch Frame](https://vegadrones.in/product/mark4-10-inch-frame/): GEP Mark4-10 Heavy Lift FPV Frame – 10-Inch Long Range GEP-Mark-10 is a frame designed to manage heavy-loads flights. It can carries a maximum payload of 3kg when applied with a 3214 or 3115 900KV motor. The light-design structure enables immediate response even when flying with extra weight. The FC fixing hole size is 30.5×30.5mm(M3), Camera lens fixing hole size is19x19mm(M2), Motor fixing hole size is 19x19mm(M3). Reserved enough space for VTX installation at the end of the frame, and the extended dimension frame can mount up to LiPo 6S 8000mah battery. Feature The extended dimension frame leaves enough space [...] - [INR-18650-26E Lithium-Ion Cell 3.7V 2600MAH (DMEGC)](https://vegadrones.in/product/dmegc-inr18650-26e-2600mah-li-ion-battery/): DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Rechargeable Battery (Grade-A) The DMEGC INR18650-26E is a high-performance 18650 lithium-ion rechargeable battery designed to deliver stable power, long service life, and reliable performance. With a 2600mAh capacity and 3.7V nominal voltage, this cell is ideal for applications that require a compact yet efficient energy source. Its cylindrical 18650 form factor and low internal resistance ensure consistent output, making it suitable for a wide range of consumer electronics and portable power applications. Key Features Large Capacity: 2600mAh for extended runtime Stable Voltage Output: 3.7V nominal for reliable performance Long Cycle Life: More than twice the [...] - [Flywoo GOKU GM10 Pro V3 GPS Module w/ Compass](https://vegadrones.in/product/flywoo-goku-gm10-pro-v3-gps-module-w-compass/): GOKU GM10 V3 GPS series is here! Using the latest M10050 GNSS chip. Compared with the previous generation GM8 V2, the positioning is more accurate, and the speed of star search is faster. Description Brand: FLYWOO Model: GM10 PRO V3 GPS w/ Compass Dimension :　25mm*25mm*6mm Weight : 7.3g Connector : 1.00mm spacing between the 6pins patch seat Features: GPS Module,Three Module Compass With electronic compass IC QMC5883L 1.0mm spacing between the 6pins patch seat Specification Electrical Characteristics Chipset : M10050(Tenth Generation Chip) Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS Default Protocol : GPS,Galileo,BeiDou Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 [...] - [XT60 Connector Set](https://vegadrones.in/product/amass-xt60-connector/): Amass XT60 Male & Female Connector – High Current RC Power Plug The Amass XT60 connector is a reliable and secure power connection solution designed for applications requiring high current handling up to 65A. Widely used in RC, FPV, and power distribution systems, the XT60 delivers excellent electrical performance with long-term durability. Manufactured from a high-temperature nylon composite, these connectors maintain structural integrity under heavy load and extreme conditions. The gold-plated spring connectors are molded directly into the housing, creating a solid, integrated connection that minimizes resistance and maximizes current flow. Key Features High Current Capacity: Supports continuous current draw [...] - [6S1P 2800mAh - Molicel P28A (18650)](https://vegadrones.in/product/6s1p-2800mah-molicel-p28a-18650/): • 6S1P 2800mAh Li-Ion Battery Pack – Molicel P28A (18650) The 6S1P 2800mAh Li-Ion battery pack is built using genuine A-grade Molicel P28A 18650 cells, delivering reliable power, high discharge performance, and long service life. Designed for demanding applications such as FPV drones, robotics, and high-current systems, this pack emphasizes durability, efficiency, and safety. No rewrapped cells — only original Molicel quality you can trust. Key Features Premium A-Grade Molicel CellsBuilt with genuine Molicel P28A cells(Also available with P42A or P45B — no rewraps) 6S1P Configuration22.2V nominal with 2800mAh capacity for stable and consistent output Copper Spot WeldingEnsures low resistance, [...] - [Zerodrag STRIX H7 flight Controller](https://vegadrones.in/product/zerodrag-strix-h7-flight-controller-specs-and-pinouts-rev-0-1/): Product specifications: Power Input: Upto 36V DC Onboard Power Rails 5V 2.5A, 12V 2.5A, Mounting Pattern: 30.5mm x 30.5mm Dimension: 37mm x 38.5mm x TBD Weight: TBD Microcontroller:  • Primary MCU: STM32H743VIH6 @ 480MHz Sensors: • IMU: 2 X ICM42688P • Barometer: Infineon DPS310 Other peripherals • OSD MCU: AT7456E • CAN: TJA1051TK-3 Blackbox: MicroSD Card Slot Supported firmware: Ardupilot, PX4, Betaflight, INav Additional: • Plug and play Connections along with Solder pads • UAVCAN Interface Compatible • Full MCU Breakout • Dedicated low noise power supply for Sensors, OSD and MCU. • Pit mode on 12V power supply Peripheral Interfaces: TYPE Number of Interfaces [...] - [TAKER H743 BT Flight Controller](https://vegadrones.in/product/taker-h743-bt-flight-controller/): Features  Adopts the high-performance STM32H743 as the main controller Equipped with MPU6000 and 42688-P dual gyroscopes 512 MB of black box storage Bluetooth parameter tuning Integrated LC filter Upgraded type-C USB interface Direct plug-in compatibility with DJI Air Unit Integrated Barometer Features 7 groups of UART 12V@2.5A + 5V@3A dual independent BEC Offers multiple firmware options Specifications MCU: STM32H743 IMU: MPU6000 + ICM42688-P(dual gyro) Air Unit Connection: Directly plugs into DJI Air Unit Black Box：512M onboard Bluetooth: Supported Barometer: Supported USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC Output: 5V@3A,12V@2.5A dual BEC Firmware Target: GEPRC_TAKER_H743 Size: 38.5×38.5mm, mounting hole size [...] - [GEPRC Battery Strap-20*300mm](https://vegadrones.in/product/geprc-battery-strap-20300mm/): Summary This is one of our newly released straps, which has a good anti-slip effect. This helps prevent ejected batteries or even crashes during aggressive flights. Feature Good wear resistance, high tensile strength. Specification Brand: GEPRC Size: 15mm*150mm/15mm*200mm/20mm*220mm/20mm*250mm/20mm*300mm Color: Black Includes 5 x GEPRC Battery Strap SIZE 15*150mm, 15*200mm, 20*220mm, 20*250mm, 20*300mm - [GEP-M10-DI GPS](https://vegadrones.in/product/gep-m10-di-gps/): This item cannot be dispatched to your selected delivery location. Please choose a different delivery location. Joint positioning in multi-mode: GPS+Beidou++Quasi-Star+SBAS common positioning with horizontal accuracy within 1.5 metres Advanced Navigation & Stability. Equipped with high-precision GPS, the GPS module ensures excellent navigation accuracy and is ideal for FPV drones. Built-in flash memory improves data storage functions UPGRADED SENSOR INPUT Equipped with the IST8310 magnetometer, which provides accurate direction and atmosphere data to maintain stability and performance in various environments Fast positioning speed: By using a Ublox chip of the 10th generation, fast positioning speed and accurate positioning are possible Easy to use, plug and play - [GEP-M10I GPS](https://vegadrones.in/product/gep-m10i-gps/): This item cannot be dispatched to your selected delivery location. Please choose a different delivery location. Joint positioning in multi-mode: GPS+Beidou++Quasi-Star+SBAS common positioning with horizontal accuracy within 1.5 metres Advanced Navigation & Stability. Equipped with high-precision GPS, the GPS module ensures excellent navigation accuracy and is ideal for FPV drones. Built-in flash memory improves data storage functions UPGRADED SENSOR INPUT Equipped with the IST8310 magnetometer, which provides accurate direction and atmosphere data to maintain stability and performance in various environments Fast positioning speed: By using a Ublox chip of the 10th generation, fast positioning speed and accurate positioning are possible Easy to use, plug and play - [GEP-M10Q GPS](https://vegadrones.in/product/gep-m10q-gps/): The GEP-M10Q GPS module offers a compact size, fast and stable positioning, and user-friendly operation. - [EM3115 900KV Motor](https://vegadrones.in/product/gep-em3115-900kv/): Feature  New EM series motors，mainly designed for long range FPV. High-strength M5 steel shaft High torque magnetic circuit design 19mmx19mm base Specifications Model: EM3115 900KV Motor Max Watt: 1620W Peak current: 65A Interphase resistance: 46mΩ Propeller: 8-10inch Propeller Magnet: N52H Bearing type: NSK/NMB Configuration: 12N14P Dimension: φ37.5mmx30mm Shaft Diameter: φ5mm Shaft Protruding Length: 16mm Mounting holes: 19mmx19mm Lead: 310mm/18AWG ESC: 60A-80A Input Volts: 25.2V（6S LiPo) Winding: Single strand copper winding Weight: 115g(included wire) Suitable for :8-10 inch long range FPV Includes 1 x EM3115 motor 4 x M3*11 round head screws 1 x M5 anti-slip nut      - [GEPRC Peano 5.8G Antenna RHCP-MMCX-110MM](https://vegadrones.in/product/geprc-peano-5-8g-fpv-antenna-lhcp-rhcp/): Summary GEPRC Peano antenna is a 5.8G optimized antenna for FPV quad. The antenna has good gain performance and very compact. Working frequency range is 5600-5950 Ghz, with LHCP and RHCP options for multi-player competition. Peano 5.8G antenna also has a variety of connector options. Every antenna has been tested strictly before leaving the factory to ensure good performance. Features 1. Compact and light-weight design, high quality ABS case for good protection and nice appearance. 2. Options of LHCP and RHCP. 3. Manufactured and tested to highest standards 4. Easy to install, multiple connectors and length options. Specifications Frequency Range: [...] - [GEPRC Momoda2 5.8G antenna RHCP MMCX 170mm(100mm+70mm)](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-rhcp-mmcx-170mm100mm70mm/): Summary The GEPRC Momoda2 5.8G antenna adopts the latest radio frequency solution in the FPV industry, pairing PCB with FPC structure to enhance signal frequency consistency while minimizing signal transmission power loss. It offers two polarization options, RHCP and LHCP, within the 5.8GHz frequency band. Features  The ingenious exterior design integrates a sleek metallic style, appealing to the eye.  The advanced radio frequency structure effectively minimizes transmission loss.  The connectors come in various lengths and styles to accommodate diverse application needs.  Every antenna undergoes testing with a spectrum analyzer to ensure compliance with SWR standards. Specifications Model： GEPRC Momoda2 5.8G [...] - [GEPRC Momoda2 5.8G antenna LHCP UFL 110mm(60mm+50mm)](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-lhcp-ufl-110mm60mm50mm/): GEPRC Momoda2 5.8G antenna LHCP UFL 110mm(60mm+50mm) Summary The GEPRC Momoda2 5.8G antenna adopts the latest radio frequency solution in the FPV industry, pairing PCB with FPC structure to enhance signal frequency consistency while minimizing signal transmission power loss. It offers two polarization options, RHCP and LHCP, within the 5.8GHz frequency band. Features  The ingenious exterior design integrates a sleek metallic style, appealing to the eye.  The advanced radio frequency structure effectively minimizes transmission loss.  The connectors come in various lengths and styles to accommodate diverse application needs.  Every antenna undergoes testing with a spectrum analyzer to ensure compliance with [...] - [GEPRC Momoda2 5.8G antenna RHCP UFL 110mm(60mm+50mm)](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-rhcp-ufl-110mm60mm50mm/): Summary The GEPRC Momoda2 5.8G antenna adopts the latest radio frequency solution in the FPV industry, pairing PCB with FPC structure to enhance signal frequency consistency while minimizing signal transmission power loss. It offers two polarization options, RHCP and LHCP, within the 5.8GHz frequency band. Features  The ingenious exterior design integrates a sleek metallic style, appealing to the eye.  The advanced radio frequency structure effectively minimizes transmission loss.  The connectors come in various lengths and styles to accommodate diverse application needs.  Every antenna undergoes testing with a spectrum analyzer to ensure compliance with SWR standards. Specifications Model： GEPRC Momoda2 5.8G [...] - [GEPRC Momoda2 5.8G antenna LHCP SMA 120mm](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-lhcp-sma-120mm/): Summary The GEPRC Momoda2 5.8G antenna adopts the latest radio frequency solution in the FPV industry, pairing PCB with FPC structure to enhance signal frequency consistency while minimizing signal transmission power loss. It offers two polarization options, RHCP and LHCP, within the 5.8GHz frequency band. Features  The ingenious exterior design integrates a sleek metallic style, appealing to the eye.  The advanced radio frequency structure effectively minimizes transmission loss.  The connectors come in various lengths and styles to accommodate diverse application needs.  Every antenna undergoes testing with a spectrum analyzer to ensure compliance with SWR standards. Specifications Model： GEPRC Momoda2 5.8G [...] - [GEPRC Momoda2 5.8G antenna RHCP SMA 90mm](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-rhcp-sma-90mm/): The GEPRC Momoda2 5.8G antenna is engineered for superior FPV signal transmission and reception. With high gain, low interference, and excellent penetration, it ensures stable, clear, and long-range video performance. Compact, lightweight, and durable, the Momoda2 is perfect for freestyle, racing, and long-range FPV flights — giving pilots reliable connectivity and a smooth flight experience every time. - [GEPRC Momoda2 5.8G antenna RHCP SMA 120mm](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna-rhcp-sma-120mm/): Summary The GEPRC Momoda2 5.8G antenna adopts the latest radio frequency solution in the FPV industry, pairing PCB with FPC structure to enhance signal frequency consistency while minimizing signal transmission power loss. It offers two polarization options, RHCP and LHCP, within the 5.8GHz frequency band. Features  The ingenious exterior design integrates a sleek metallic style, appealing to the eye.  The advanced radio frequency structure effectively minimizes transmission loss.  The connectors come in various lengths and styles to accommodate diverse application needs.  Every antenna undergoes testing with a spectrum analyzer to ensure compliance with SWR standards. Specifications Model： GEPRC Momoda2 5.8G [...] - [GEPRC Momoda2 5.8G antenna LHCP SMA 90mm](https://vegadrones.in/product/geprc-momoda2-5-8g-antenna/): The GEPRC Momoda2 5.8G antenna is engineered for superior FPV signal transmission and reception. With high gain, low interference, and excellent penetration, it ensures stable, clear, and long-range video performance. Compact, lightweight, and durable, the Momoda2 is perfect for freestyle, racing, and long-range FPV flights — giving pilots reliable connectivity and a smooth flight experience every time. - [GEPRC Momoda2 5.8G DUAL AntennaLHCP SMA 90mm](https://vegadrones.in/product/geprc-momoda2-5-8g-dual-antenna/): Summary The GEPRC Momoda2 5.8G DUAL antenna incorporates a dual-core RF solution to enhance gain and expand coverage. Practical testing has demonstrated significantly improved directional compatibility. The Momoda2 5.8G DUAL antenna guarantees stable and reliable image transmission during flight, with extended transmission distance. Features Enhanced gain with dual-core RF technology.  Ultra-low VSWR for improved transmission efficiency  Adopts premium antenna interface  Ultrasonic welding for tight and secure assembly  Each antenna undergoes meticulous testing with a spectrum analyzer to ensure VSWR compliance with industry standards Specifications Model: GEPRC Momoda2 5.8G DUAL antenna Center Frequency: 5.65GHz Bandwidth: 5.3GHz～6GHz Polarization: LHCP/RHCP Gain: 3.8dbi Axial [...] - [Gemfan 2023 Hurricane PC 3 Blade 1.5mm - Clear Gray (4 Pairs)](https://vegadrones.in/product/gemfan-2023-hurricane-pc/): Gemfan 2023 Hurricane PC propellers are lightweight, durable, and precision-engineered for micro drones. Made from tough polycarbonate, these props deliver smooth flight, fast response, and excellent durability — making them perfect for indoor racing, freestyle flying, and high-performance micro FPV builds. - [Gemfan 2015 PC 2 Blade 1.5mm - Clear Gray (4 Pairs)](https://vegadrones.in/product/gemfan-2015-pc/): Gemfan 2015 PC propellers are designed for ultra-lightweight micro drones, delivering smooth control, fast response, and reliable durability. Made from strong polycarbonate, these props provide stable flight performance and precise handling — perfect for indoor FPV racing, freestyle flying, and custom micro builds. - [Gemfan D63 Ducted PC 3 Blade 1.5mm - Clear Gray (4 Pairs)](https://vegadrones.in/product/gemfan-d63-ducted-pc-3-blade-1-5mm/): Perfect for cinewhoops and indoor FPV, the Gemfan D63 3-Blade Propellers offer smooth, stable performance with a 1.5mm shaft for precise fit and durability. Available at Vega Drones. - [Gemfan 13X10 Glass Fiber Nylon 3 Blade CW/CCW- Black (1 Pairs)](https://vegadrones.in/product/gemfan-13x10-glass-fiber-nylon-3-blade-cw-ccw-black-1-pairs/): Specification: Material:Reinforced Carbon Nylon/Glass Fiber Nylon Weight:45.5g Reinforced Carbon Nylon/41g Glass Fiber Nylon Pitch:10in Prop Dia: 330.2mm Center Thickness:14mm Center Hole Dia:6mm Adaptive Motor:4110-340kv Colors:Black, Red, Yellow, White Package Includes: 1CW + 1CCW props - [Gemfan 1050 Cinelifter Glass Fiber Nylon 3 Blade CW/CCW- Black (1 Pairs)](https://vegadrones.in/product/gemfan-1050-cinelifter-3-blade-propellers-cw-ccw/): The Gemfan 1050 Cinelifter 3-Blade Propellers CW/CCW are built for power, stability, and smooth performance. Designed in CW/CCW pairs, they deliver balanced thrust and reliable control for heavy-lift FPV drones. Available at Vega Drones, these propellers are perfect for pilots who demand efficiency and precision in every flight. - [Gemfan 7037 Cinelifter Carbon Nylon 3 Blade CW/CCW- Black (2 Pairs)](https://vegadrones.in/product/gemfan-7037-cinelifter-propellers/): Gemfan 7037 Cinelifter propellers are built for stability, efficiency, and smooth cinematic flight. Designed for heavy-lift FPV drones, these durable props deliver powerful thrust, reduced vibration, and reliable performance — making them ideal for professional aerial cinematography and long-range flights. - [Gemfan 7035 Hurricane PC Reinforced 3 Blade - Black (2 Pairs)](https://vegadrones.in/product/gemfan-7035-hurricane-pc/): Gemfan 7035 Hurricane PC propellers are crafted from durable polycarbonate for maximum strength, balance, and efficiency. Designed for freestyle and racing drones, these props provide excellent control, smooth handling, and responsive performance — perfect for pilots who demand speed, precision, and durability in every flight. - [Gemfan 7042 Flash PC 2 Blade - Clear (2 Pairs)](https://vegadrones.in/product/gemfan-7042-flash/): Gemfan 7042 Flash propellers are engineered for power, speed, and stability in FPV drones. Built from durable polycarbonate, these high-efficiency props deliver smooth throttle response, strong thrust, and precise handling — making them ideal for freestyle, racing, and cinematic long-range flights. - [Gemfan 51433 Hurricane PC 3 Blade - Clear Black (2 Pairs)](https://vegadrones.in/product/gemfan-51433-hurricane-pc-3-blade-clear-black-2-pairs/): Specification: Material:PC Weight:3.8g Pitch:3.5in Prop Dia:129.7mm Center Thickness:6mm Center Hole Dia:5mm Adaptive Motor:2206-2306 Colors: Clear, Clear black, Orange, Purple, Pink, Yellow, Galaxy Package Includes: 2CW + 2CCW props - [Gemfan 3018 Hurricane PC 2 Blade 1.5mm - Clear Gray (4 Pairs)](https://vegadrones.in/product/gemfan-3018-hurricane-pc-2-blade-1-5mm-clear-gray-4-pairs/): Specification: Material:PC Weight:1.66g/pair Pitch:1.6in Props Dia:76.5mm Center Thickness:5.5mm Center Hole Dia:2/1.5mm Adaptive Motor:1108-1303 Recommended Motor:1303 5000kv Colors:Clear, Clear Grey, Yellow, Whisky Package Includes: 4CW + 4CCW props - [Gemfan LR 7035 PC 2 Blade M5 - Black (2 Pairs)](https://vegadrones.in/product/gemfan-lr-7035-pc-2-blade-m5-black-2-pairs/): Specification: Material:PC Weight:4.2g Pitch:3.5in Prop Dia:178.6mm Center Thickness:5.5mm Center Hole Dia: M5  Colors:White, Whisky Package Includes: 2CW + 2CCW props - [Gemfan 7050 Hurricane PC 3 Blade - Clear Gray (2 Pairs)](https://vegadrones.in/product/gemfan-7050-hurricane-pc-3-blade-clear-gray-2-pairs/): Gemfan Hurricane 7050-3  Inch: 7in    Pitch:5in Weight:8.9g    Mount:5mm Colors: Clear Gray， Clear Green Recommended Motor:2806.5 2808 Prop Disk Diameter: 178.4mm Center Thickness: 7mm Max Prop Width :  18.5mm Materials:PC   Characteristic: High pitch with high efficiency, so much power, super stiff and will not flatten out at high rpm. - [Gemfan 51499 Hurricane PC 3 Blade - Clear (2 Pairs)](https://vegadrones.in/product/gemfan-51499-hurricane-pc-3-blade-clear-2-pairs/): Specification: Material:PC Weight:4.96g Pitch:4.2in Prop Diameter:128.8mm Center Thickness:7mm Center Hole Dia:5mm pop Adaptive Motor:2205~2306 Colors:Clear, Clear Blue, Clear Purple, Whisky, Clear Yellow, Clear Red Package Includes: 2CW + 2CCW props - [Gemfan 51466 V2 Hurricane PC 3 Blade - Midnight Gray (2 Pairs)](https://vegadrones.in/product/gemfan-51466-v2-hurricane-pc-3-blade-midnight-gray-2-pairs/): Specification: Material:PC Weight:4.2g Pitch:3.6inch Prop Diameter: 131.8mm Center Thickness:6.8mm Center Hole Dia: M5 Adaptive Motor:2207-2306 and up Color:Midnight Gray Package Includes: 2CW + 2CCW props - [Gemfan D90 Ducted PC 3 Blade M5 - Clear Gray (2 Pairs)](https://vegadrones.in/product/gemfan-d90-ducted-pc-3-blade-m5-clear-gray-2-pairs/): Specification: Material: PC Weight: 2.3g Pitch: 3inch Props Dia: 90mm/3.5” Center Thickness: 5.5mm Center Hole Dia: M5 Adaptive Motor: 2203-2306 Color: Clear Gray Package Includes: 2CW + 2CCW props - [Radiomaster XR3 Nano Multi-Frequency Antenna Diversity - Dual Band](https://vegadrones.in/product/xr3-nano-multi-frequency-antenna-diversity-expresslrs-receiver/): The XR3 Receiver is a versatile, ultra-compact ExpressLRS receiver, measuring just 20 x 15mm. Powered by the advanced third-generation Semtech LR1121 transceiver, the XR3 operates seamlessly on 2.4GHz OR Sub-G 900MHz bands. Whether you’re flying on 2.4GHz or 900MHz, the XR3 delivers exceptional range and sensitivity in a small, lightweight package — perfect for any build. With the reliability of ExpressLRS, you can focus on flying without worrying about link quality. Designed for convenience, the XR3 features built-in Wi-Fi for effortless configuration and firmware updates. Access and manage settings through an intuitive WebUI on your PC or mobile device with [...] - [Radiomaster XR1 Nano Multi-Frequency ExpressLRS Receiver - Dual Band](https://vegadrones.in/product/radiomaster-xr1-nano-multi-frequency-expresslrs-receiver-dual-band/): The XR1 Receiver is a versatile, ultra-compact ExpressLRS receiver, measuring just 20 x 13mm. Powered by the advanced third-generation Semtech LR1121 transceiver, the XR1 operates seamlessly on 2.4GHz OR Sub-G 900MHz bands. Whether you’re flying on 2.4GHz or 900MHz, the XR1 delivers exceptional range and sensitivity in a small, lightweight package — perfect for any build. With the reliability of ExpressLRS, you can focus on flying without worrying about link quality. Designed for convenience, the XR1 features built-in Wi-Fi for effortless configuration and firmware updates. Access and manage settings through an intuitive WebUI on your PC or mobile device with [...] [comment]: # (Generated by Hostinger Tools Plugin)